

Add to Cart
API 5L Gr.B PSL1 3PE Coated High Frequency Welded Pipe use for pipeline
ERW (Electric Resistance Welded) pipes are welded longitudinally, manufactured from Strip / Coil and can be manufactured upto 24” OD. ERW pipe cold formed from a ribbon of steel pulled through a series of rollers and formed into a tube which is fused through a electric charge. It is mainly used for low/ medium pressure applications such as transportation of water / oil. Pearlites steel is one of the leading ERW Stainless Steel Pipes Manufacturer and exporter from India. Contact us for product details.
Common sizes for ERW Steel Pipe range from 2 3/8 inch OD to 24 inch OD in a variety of lengths to over 100 feet. Surface finishes are available in bare and coated formats and processing can be handled on site to customer specifications
3PE coated steel pipe is commonly used in the pipeline project. As carbon steel pipe is widely used in pipeline systems for transportation of oil, gas, water and other fluids.In such cases, they should have high resistant to corrosive from chemicals, moisture, harmful environment and etc. So it is necessary to make pipes coating to anti-corrosion.So we usually use 3PE, 2PE, FBE coated and another lining method. 3LPE coating is commonly used, including 3 layer polyethylene. The 3PE coating steel pipe has good impact resistance, abrasive resistance, shock resistance, acid resistance, high quality, and long service life.
Usage: | Used for low pressure liquid transportation |
ERW : | Electric Resistance Welded pipe |
HFW: | High Frequency Induction weld pipe |
EFW: | Electric Fusion Welded Pipe |
Standard: | API 5L |
Certificate: | ISO 9001, ISO 14001, OHSAS 18001, API 5L PSL1&PSL2, |
Out Diameter: | 114.3mm - 660.4mm (4"-26") |
Wall Thk: | 4mm-22mm |
Length: | 3M-18M |
Steel Grade: | API 5L PSL1 & PSL2: GR B, X42, X46, X56, X60, X65, X70 ASTM A53: GR.A, GR.B |
Surface: | Fusion bond Epoxy coating, 3PE, |
Tests: | Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Bending Test, Blow Test, Impact Test), Exterior Size Inspection, Hydrostatic Test. |
MTC: | EN 10204/3.1B, EN 10204/3.2 (with Third Party Inspection) |