Natural Rubber Pneumatic Yokohama Ship Fenders With Chain And Tire

Yokohama Ship Fender

Yokohama ship fender is always used as a bumper to absorb the reaction force and also suitable for places where tides vary greatly. Yokohama ship fender is made of natural rubber and reinforced synthetic-tire-cord layer which is strong enough to withstand external force and hard usage. Besides, it's easy to be deflated and enjoys simple and cost-effective relocation. Jerryborg is specializing in offering various types and sizes of Yokohama ship fenders to meet customers' requests and different application conditions.

Yokohama Ship Fender Structure

Yokohama ship fender consists of outer rubber layer,synthetic-tire-cord layer, and inner rubber layer. The outer rubber layer is made of special compounds that are strong with high tensile strength and tear strength to better protect the fender from the damage of severe weather conditions and hard usage. The synthetic-tire-cord layer is a composite tire cord with cross shadow lines, which is designed to distribute stress evenly. While the inner rubber layer is specially designed to seal the internal air and prevent any leakage.

① Outer rubber layer

② Synthetic-tire-cord layer

③ Inner rubber layer

Yokohama Ship Fender Classification

Yokohama ship fenders are produced with two initial pressure ratings, which are pneumatic 50 (P50, initial internal pressure 50kPa) and pneumatic 80 (P80, initial internal pressure 80kPa).

Yokohama ship fenders are mainly classified into three types as follows:

1. Yokohama Ship Fender with Chain and Tyre Net

With chain and tire net covering the fender body, the Yokohama ship fender can reduce the damage of friction and abrasion caused by direct contact. Therefore it’s widely used in places with complicated and unstable tide variation, such as ship-to-ship(STS) and ship-to-dock(STD) operations. In addition, as for the protective tire, Jerryborg offers four types of tires with different sizes and thicknesses for customers to select.

2. Sling Type Yokohama Ship Fender

Sling type Yokohama ship fender will be connected with a guy chain or guy rope with a lifting device on both ends.

3. Hydro Pneumatic Type Yokohama Ship Fender

Hydropneumatic Yokohama ship fender is usually used as a bumper with submarines and other semi-submersibles platforms. It can be installed vertically in the water cause it’s filled with air and water inside and equipped with a counterweight.

All these Yokohama ship fenders mentioned above are available usually in black, the color is also customized upon your request. Jerryborg offers Yokohama ship fenders with various sizes in diameter ranging from 500mm to 4500mm, length ranging from 1000mm to 9000mm.

4. Other Types

Yokohama Ship Fender Application

1. Ship-to-ship transfer operations

2. Ship-to-ship services

3. Offshore platform defense

4. Ship berthing at the dock

5. Hang on the ship hull

Specifications of Yokohama Ship Fender

Pneumatic 50 Standard Sizes:

Pneumatic 80 Standard Sizes:

For further information free to contact us.

Qingdao Jerryborg Marine Machinery Co., Ltd is a leading international marine products manufacturer & distributor with 15+ years of rich experience in production of marine docking & mooring systems. Jerryborg Marine Machinery Co., Ltd, headquartered in Qingdao, China, is committed to marine fendering and floating products production, R&D and sales. The Jerryborg Marine is equipped with production facilities for high-quality rubber products, ship launching airbags and foam fenders, Yokohama type pneumatic rubber fender, navigation buoys, steel/EVA mooring buoy, distributing mooring ropes, steel wire ropes, marine hardware like anchor chains, anchors, etc.

The Jerryborg serves as a strategic partner of Marine Fender & Mooring Industry, providing excellent products as well as professional and technical expertise. While our true role is designer and manufacturer for marine docking & mooring systems with accessories. We value all customers as important parts of our team, supporting them like close partners. we are with them at each step of the project, from technical consulting, engineering customized fendering and mooring solutions to the manufacturing and installation of marine docking & mooring systems. Our rich experience has earned a good reputation as a dependable partner in the waterways markets, harbors, international ports, etc.

Regional Distributors

The Jerryborg headquarters in Qingdao has an experienced team handling projects and orders from North American region, Asian-Pacific region, European region and EMEIA. The regional distributors promote the local contact with customers. Our cooperation with regional distributors is based on mutual trust, loyalty, long and close working partnership. During our annual meeting all our distributors meet with the service teams to keep informed on industry developments and to catch up with our highly internal quality standards as the best counselors for our customers. Direct contact between all our employees and distributors plays a significant role in our company’s development.

Manufacturing Facilities

Providing safe & critical marine fender systems and mooring systems, the Jerryborg has a strong focus on manufacturing all major spare parts in-house, guaranteeing “higher than highest” quality and reliability at their own production machines. Our rubber fender manufacturing machines in Qingdao has an extensively proven track record of manufacturing high quality rubber fender products & mooring products.

All staff and partners who are involved in the production of marine products are well qualified, frequently trained and further educated to keep up with the latest developments in their specific job.rubber rolling mill, fender press test machine, rubber vulcanizer.

Jerryborg's Focus

It is the mission of what our products are meant to do——creating the value of protection and safety. We offer the full range of marine fender products and marine mooring buoy products, from simple rubber products to highly engineering systems, as well as spare parts and fixings. A strong focus lies on internal manufacturing to offer high-level fenders & buoys at reasonable prices.

our fender systems are designed with an eye for the big picture to make sure our products qualified for the task, while paying attention to every little detail. Engineering advantages means that our partners can be confident in expecting the best from us in all areas.