Software LIFEPO4 4S 12V 80A Bluetooth Smart Bms

Software Smart BMS bluetooth Battery Management System 4S12V 80A-120A

What is battery management system BMS?

Deligreen BMS is defined as an electronic system that manages a rechargeable battery(lithium phosphate,NCM battery,single cell or battery pack) by monitoring its state, calculating secondary data, reporting that data, protecting the battery, controlling its environment, and/or balancing it.

Why do we need battery management system?

Battery Management Systems are the brains/CPU behind battery packs. They manage the output, charging,discharging and provide notifications on the status of thebattery pack. They also protect the batteries from damage.

What is 4S12V 80A Common Port BMS?

This is a smart battery management system,which monitor and control the status of the batteries&battery pack.It's a lifepo4 battery BMS,4 batteries in series,12V,80A current.common port.

The battery can be in surveillance on your phone,through which you can watch the current,voltage,over current,over voltage etc of the batteries.It is connected by the bluetooth of the BMS.Smart BMS is more convenient than the hardware BMS.

Why do we need this 4S12V 80A BMS?

When you have 4 lithium phospate battery in series,you know the charge/discharge current,40A and 80A,you can choose this type BMS for your battery.It can support the highest 260A pead discharge current.

4S12V 80A-120A Specification

Connection diagram

Smart BMS 4S LIFEPO4 12V BMS,ranges 80A-120A,common port,separate port.This is the connection diagram for your wiring.

Pls kindly follow up the guide,in case the battery gets burnt by short circuit.

1, PIs do not insert balance wires into BMS before connecting batteries, must make sure connecting with batteries correct.

2, The sequence of connecting wires for BMS:

Notes: PIs ensure to use balancing wires from Daly!

1. From thin black balance wire to start, the 2nd wire(thin red wire) connect with the 1st battery's positive pole. Then connect each ell's positive pole in order until the last one B+;

• Do not insert the connector directly after the wires were connected. Measure the voltage between two adjacent metal terminals on the back of the connector. If it is Li-ion battery, the voltage should be between 3.0 ~ 4.2V, Lifepo4 battery should be between 2.0 ~ 3.6V, and LTO battery should be between 1.5~ 2.75V;
• After the wiring sequence and voltage are confirmed to be correct, then insert into BMS; .
• Adjust the multimeter to the buzzer position and measure the internal resistance between B - and P -when the internal resistance is 0, there will be a beep, which means that the BMS is good. Otherwise,do not weld and contact the customer severice.;
• The last step to connect B-(thick blue wire) with battery pack's total negative pole.

After finished wiring:

Measure whether the B + and B-voltage and B + and P-voltage of the battery are equal, If yes, it means the BMS works normally and can be used. If not, please recheck according to the above wiring sequence.

Package

About US

Changsha Deligreen Power Co.LTD,founded in 2010,is a "Green Energy Solution Service Provider".

Newest technology,new idea,hard-working and honest people.

Focus on lithium rechargeable battery,BMS,Balancer,charger and relative products.

BMS is one of best sellers,we've been receiving thousands of good comment from our clients because of its good quality and function

The separate parts of smart BMS

• Two wheels style heatsinks
• Wave style heatsink
• High current board(with 3mm pure copper port)
• BMS PCBA
• Thermally conductive silica gel
• Pure aluminum heatsink

FAQ

Q:What battery types do your BMS work with?

A:Our BMS can work for lithium phospate battery(Lifepo4)and NCM battery,lithium ion battery,ple let us know what your battery type before placing order.

Q:What BMS range can you supply?

A:Deligreen is a professional BMS supllier with abundant BMS range.Series from 3S-32S,Current from 10A-500A,if you need more series,pls contact us.

Q:How to choose the BMS that I need?

A:You need to make sure of following

1.battery type

2.charge current

3.discharge current

4.battery pack(series,parallel)

5.Peak discharge current

Q:Can I watch the battery status from my mobile phone?

A:Yes,this is waht a samrt BMS do,you can watch the status of your batteries in your APP throush bluetooth connected between phone and the BMS.

Since 2010, we've been one of the largest wholesalers of rechargeable batteries.

We solely focus on high - quality, grade A, brand - new batteries.

Our range includes LiFePO4, LTO, Sodium, solid - state batteries, and other trending ones.

Both cylindrical and prismatic cells are available, with capacities from 1300mAh to 320Ah.

These batteries are mainly for EVs and residential energy storage.

We have warehouses in Poland, the USA, and China.

This enables customers to select high - quality products and avoid poor - quality batteries.

It also allows us to deliver products quickly.

Moreover, we have a battery pack factory that supports design, OEM, and customization like 12V, 24V, 48V, etc.

We are an honest team.

Trust our 14 - year experience to help you achieve great success.

For more updated information, please subscribe our Linked In and Youtube:

https://www.linkedin.com/company/changsha-deligreen-power-lithium-battery

https://www.youtube.com/@deligreenbattery

WHY CHOOSE DELIGREEN?