ASTM A106 GRB Black Painted Carbon Steel SCH10 45 Degree Pipe Elbow
Brand Name:Shengtian
Certification:EN10204 3.1B/BV/TUV/SGSISO9000
Model Number:Elbow 023
Minimum Order Quantity:1 piece
Delivery Time:7-10 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Cangzhou Hebei China
Address:
Yihe building, Cangzhou City, Hebei Province,China
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
ASTM A106 GRB Black Painted Carbon Steel 45 Degrees Pipe Fittings Elbow
ASTM A106 short radius in accordance with ASTM A106 Carbon steel pipe fittings manufactured to ASTM A106 are usually furnished in the butt-welding form in accordance with ASTM A106 Carbon Steel 90 ° Long Radius Elbow are widely used in different industries like power, engineering, construction and many more.
Chemical Composition (%) of ASTM A106 Pipe Fitting Elbow
| Grade | C | Mn | P | S | Si | Cr | Mo | Ni | Cu | V | Nb |
| WPB | 0.3 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
| WPC | 0.35 | 0.29-1.06 | 0.05 | 0.058 | 0.1min | 0.4 | 0.15 | 0.4 | 0.4 | 0.08 | 0.02 |
| WP11 CL1 | 0.05-0.15 | 0.30-0.60 | 0.03 | 0.03 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | - | - | - | - |
| WP11 CL2/3 | 0.05-0.20 | 0.30-0.80 | 0.04 | 0.04 | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 | - | - | - | - |
Notes:
For each reduction of 0.01% below the specified C maximum, an increase of 0.06% Mn above the specified maximum will be permitted, up to a maximum of 1.35%.
The sum of Cu, Ni, Cr, and Mo shall not exceed 1.00%.
The sum of Cr and Mo shall not exceed 0.32%.
The maximum carbon equivalent (C.E.) shall be 0.50, based on heat analysis and the formula C.E.=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15.
ASTM A106 Pipe Fitting Elbow Mechanical Properties
| Tensile Requirements | WPB | WPC, WP11CL2 | WP11CL1 | WP11CL3 |
| Tensile Strength, min, ksi[MPa] | 60-85 | 70-95 | 60-85 | 75-100 |
| (0.2% offset or 0.5% extension-under-load) | [415-585] | [485-655] | [415-585] | [520-690] |
| Yield Strength, min, ksi[MPa] | 32 | 40 | 30 | 45 |
| [240] | [275] | [205] | [310] |
Where the wall thickness lies between two values above, the min elongation value is determined by the following equations:
- Longitudinal E=48t+15.00
- Transverse E=32t+10.00
- E = elongation in 2in [50mm], %
- t = actual thickness of specimen, in [mm]
Product Show
ASTM A106 GRB Black Painted Carbon Steel SCH10 45 Degree Pipe Elbow
Inquiry Cart
0