SG10 Type H-Class Insulation Dry-Type 11Kv 33Kv Power Transformer
Brand Name:XG
Certification:ISO, CCC
Model Number:SG10
Minimum Order Quantity:1 SET
Delivery Time:3-7 DAYS
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Address:
Weibei industrial zone, Lintong district, Shanxi. CHINA
Supplier`s last login times:
within 2 hours
Product Details
Company Profile
Product Details
1.SG10 Type H-Class Insulation Dry-Type 11Kv 33Kv Power Transformer
01) The core is made of cold-rolled silicon steel sheet with high magnetic permeability, and the structure is drawn plate;
The magnetic circuit is short, the loss and noise level is low;
02) Winding adopts compression line, small loss, strong short-circuit resistance;
03) The active part adopts special pressing mode, and axial compression is reliable;
04) The oil tank is bell shaped, full folding plate structure, good appearance, easy maintenance;
05) The capsule type oil container is used to minimize the aging of oil.
06) Local discharge: the apparent discharge at 1.5 times the rated voltage is less than 80pC;
07) Noise :63MVA and below products less than 58dB(AN);
08) Power loss: no-load loss is 30% lower than IEC standard;
09) Reliability: No damage or oil leakage occurred to all in-service products;
10) Short circuit resistance: SFZ11-5000/132 products successfully passed the national short circuit resistance test
Transformer quality supervision and inspection center and through the Netherlands "KEMA" quality control system.
2.Advantages of cast resin dry type transformer
1)Simple maintenance: seldom need any maintenance.
2)They are pollution-free
3)They are used in the areas of contaminated and damped
4)They are easier to Install.
5)They have long servie life because of the dielectric heating
& low thermal
6)Protects the property & people
7)For short circuit currents, they have high resistance
8)Performance is excellent
Capacity is high to support overloads
3.Technical parameter
| Dry-type transformer type | Cast Resin |
| Manufacturing Standards | IEC, ANSI |
| Rated Capacity | Up to 25MVA |
| Rated Voltage | Up to 36KV |
| Phases | Single or Three phase |
| Tapping | With tapping links or on-load tap changer |
| Frequency | 50Hz or 60Hz |
| Vector groups | Dy, Yy, Yd as standard. Other on request |
| Class Insulation | According to IEC 60085, Class F or Class H |
| Type of cooling | AN (natural air),AF, AFWF on request |
| IP Rate | IP00 to IP54 |
| Environment Class | E2 |
| Climate Class | C2 |
| Fireproof Class | F1 |
4. FAQ
1. Send the technical data, better for all useful information; we will make a good recommendation.
2. Usually shipped by sea, small order or urgent order we can send you by air.
3. All our activities are accredited to ISO 14001:2015 and IEC standard.
4. The lead time depend on quantity of order. Some standard type is on stock. Otherwise, it will take 3-15 days.
SG10 Type H-Class Insulation Dry-Type 11Kv 33Kv Power Transformer
Inquiry Cart
0