AAC Concrete Block Machine Making Machine - JC series Jaw Crusher Machine for underground mine

Jaw crusher AAC Block Plant Machinery

Description:

The JC series jaw crusher machine is a new type of jaw crusher with optimized and developed design on structure, material selection, manufacture process and assembly, which is based on absorbing the international advanced technology and applying our company's decades design concept and technology of jaw crusher. With the feature of smart structure and excellent performance, the machine is suitable for crushing all kinds of hard and abrasive rock and mineral ore. In order to meet the needs of different working conditions from the customers, this machine can apply modular bolt connecting frame without welding.

Features:
STRONG STRUCTURE:
There are two types of frame for JC Jaw Crusher: welded frame and modular bolt connecting frame. Generally we apply the welded frame for the small and medium-sized jaw crusher and the modular bolt connecting frame for the large-sized jaw crusher. The welding method for the welded frame greatly reduces the stress concentration to ensure the equal strength of the frame in different directions. They have the features of impact resistance, even force and low failure rate, etc. The modular bolt connecting frame has the features of fatigue strength and high reliability. The non-welded method for the modular bolt connecting frame is very convenient for transportation and installation, especially suitable for the underground mine, high altitude mine and other places which are narrow or difficult for transportation.

OPTIMAL DESIGN OF CRUSHING CHAMBER:
Applying the V-type symmetrical design of crushing chamber, the actual width of the feeding opening is consistent with its nominal width. Also with the deep crushing chamer, tight nip angle and long stroke, the machine has lower energy consumption and better processing capacity and crushing performance.

SWING JAW ASSEMBLY:
The swing jaw assembly consists of forged eccentric shaft, high-duty rolling bearings and the swing jaw optimized by FEM analysis, which ensure the impact resistance and stability of swing jaw assembly. By using the labyrinth seal and centrailized lubrication system, there ensure no pollution to the bearing grease and convenient lubrication, also ensure long operating time and good stability.

PROTECTOR PLATE OF SWING JAW:
The protector plate installed on the swing jaw reduces the impact force from materials, which effectively protect the swing jaw and bearings inside.

QUICK AND CONVENIENT CSS ADJUSTMENT:
The JC Series Jaw Crusher applies mechanical or hydraulic discharge asjusting device for CSS. Compared with gasket adjustment, its double wedge adjustment is simple, safe and fast. It can also reduce the downtime.

BEARING:
The special bearing design ensures the big loading capacity, long service life and reliable operating.

ROD SPRING OR HYDRAULIC CYLINDER:
Eigher the hydraulic cylinder or rod spring will be used for swing jaw tension device. The rod spring applies advanced friction reducing devices which can make easy and qucik adjustment.

INTEGRAL BEARING HOUSE:
The integral casting bearing structure ensures the perfect match with the main frame, which avoids the unnecessary radial load to the bearings during the fastening process of integral bearing house. This makes bearing running more smoothly.

INTEGRATED MOTOR DESIGN:
The integrated design of the motor base together with the main frame not only saves the installation space of jaw crusher, but also reduce the length of the V-belt. As a result of synchronized motion of the frame, motor base and motor, adjustable motor base realize V-belt tension adjustment, increase the life time of the V-belt.

RUBBER DAMPING DEVICE:
The special rubber damping device effectively absorbs the equipment vibration. Meanwhile it allows crusher vertical and longitudinal displacement, which reduces the impact to the foundation base.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.