Medical Home Digital Accurate SPO2 Finger Pulse Oximeter

Product Name

Medical Home Easy Use Digital Accurate SPO2 Blood Oxygen Saturation

Pulse Oximeter Fingertip

Function Specification

Environment Requirements

Storage Environment

a) Temperature :-40℃~+60℃

b) Relative humidity :<95%

c) Atmospheric pressure :500hPa~1060hPa

Operating Environment

a) Temperature :10℃~40℃

b) Relative Humidity :s75%

c) Atmospheric pressure :700hPa~1060hPa

1) Display Format: OLED Display;

SpO₂ Measuring Range: 0%- 100%;

Pulse Rate Measuring Range: 30 bpm - 250 bpm;

Pulse Wave Display: columniation display and the waveform display.

2) Power Requirements: 2 x1.5V AAA alkaline battery(or using the rechargeable

battery instead), adaptable range: 2.6V~3.6V.

3) Power Consumption: Smaller than 30mA.

4) Resolution: 1% for SpO₂ and 1 bpm for Pulse Rate.

5) Measurement Accuracy: ±2% in stage of 70%-100% SpO₂ , and meaningless

when stage being smaller than 70%.±2 bpm or±2% (select larger) for Pulse Rate.

6) Measurement Performance in Weak Filling Condition: SpO₂ and pulse rate

can be shown correctly when pulse-filling ratio is 0.4%. SpO₂ error is ±4%, pulse rate

error is +2 bpm or±2% (select larger).

7) Resistance to surrounding light: The deviation between the value measured in

the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.

8) It is equipped with a function switch. The Oximeter can be powered off in case no

finger is the Oximeter within 5 seconds.

9) Optical Sensor

Red light (wavelength is 660nm, 6.65mW)

Infrared (wavelength is 880nm, 6.75mW)

Troubleshooting

Who need this?

People with vascular disease (coronary heart disease, high blood pressure,

high blood lipids, cerebral thrombosis...)

There are lipid deposits in the vascular cavity, and the blood is not smooth.

In patients with cardiovascular and cerebrovascular problems with oxygen supply,

the blood is thick, coupled with coronary artery hardening, and the vascular cavity

is narrowed, so that the blood supply is not smooth and the oxygen supply is difficult.

The body is "hypoxia" every day. Long-term mild hypoxia, the heart, brain and other

organs that consume a lot of oxygen will gradually decline. Severe hypoxia can cause

"myocardial infarction" and "cerebral infarction". If oxygen is not supplied in time, it will

cause sudden death. Therefore, the long-term use of pulse oximetry to detect the blood

oxygen content of cardiovascular and cerebrovascular patients can effectively prevent

the occurrence of danger. If hypoxia occurs, oxygen can be supplemented as soon as

possible, which greatly reduces the chance of disease.

People with respiratory diseases (asthma, bronchitis, old chronic bronchitis,

pulmonary heart disease, chronic obstructive pulmonary disease...)

Difficulty in breathing leads to limited intake of oxygen. Blood oxygen testing for respiratory

patients is indeed very important. On the one hand, breathing difficulties can lead to insufficient

oxygen uptake. On the other hand, the persistence of asthma will also block the small organs

and cause gas exchange. Difficulty occurs, leading to hypoxia, causing heart, lung, brain and

even kidney damage to varying degrees. Therefore, the use of pulse oximeter to detect blood

oxygen content greatly reduces the incidence of respiratory tract.

People over 60 years old

Physiological aging of the heart and lung organs, insufficient oxygen uptake. Inadequate oxygen

supply.The human body relies on blood to transmit oxygen. If there is less blood, there will

naturally be less oxygen. With less oxygen, the physical condition will naturally decline. Therefore,

the elderly should use pulse oximetry to test the blood oxygen level every day. Once the blood

oxygen is below the warning level, oxygen should be supplemented as soon as possible.

People who work more than 12 hours a day

The brain's oxygen consumption increases, and the oxygen supply cannot meet the consumption

The oxygen consumption of the brain accounts for 20% of the whole body oxygen uptake, and

the brain's oxygen consumption will inevitably increase with the transition of mental work.

The human body can take in limited oxygen, consumes more, and consumes less. In addition

to causing dizziness, fatigue, poor memory, slow reflection and other problems, it can also

cause serious damage to the brain and myocardium, and even death from overwork. Therefore,

people who study or work 12 hours a day must use pulse oximetry to test blood oxygen every

day Content, monitor blood oxygen health from time to time, to ensure heart and brain health.

Athlete/Health enthusiasts/High altitude climbing

For aviators, sporting enthusiasts, skiers, bikers, or high altitude climbing, it is a RELIABLE

companion for quick and easy readings for oxygen saturation.Real-time blood oxygen monitoring

of athletes helps to understand the blood circulation of athletes after a large amount of exercise,

so as to guide the formulation of athletes' exercise volume.

Long-term alcoholics

The human body needs three units of oxygen for every unit of alcohol that is completely decomposed

into water and carbon dioxide. Therefore, hypoxia is one of the important manifestations of drunkenness. However, long-term alcoholics have formed a certain tolerance to alcohol and hypoxia, and they are

basically unable to detect them when they are slightly drunk. Therefore, carry an oximeter with you

to know the physical condition and drunkenness of alcoholics in time to avoid alcoholism.

How to ensure the accuracy of your measurement?

1,Moving too fast will affect the accuracy; try to stay still while waiting for your reading.

2,When the oxygen saturator and the heart are at the same level, the measurement results are optimal.

3, Avoid nail polish or long nails on the finger used for the reading. Fingers should not be wet at all either.

4,Ring finger, middle finger and index finger are recommended as suitable monitor position

Hunan Zhongliankang Medical Technology Co., Ltd., subsidiary of Yufing Group, was founded in February, 2020, its manufacturing center is located in Jiuhua Economic Development Zone, Xiangtan, Hunan, China, covering an area of 4000 Square Meters. Equipped with international scientific R&D and production equipment and the leading simulation laboratory, it has built a one-stop service of R&D, manufacturing and marketing of various medical devices like Infrared Thermometer, Electronic Thermometer, Disposable Body Bag, Pulse oximeter, etc., successfully have created self-brand CARE4U. All CARE4U medical products are FDA approved, CE certified, RoHS compliant, are widely popular in the global market. With a stronger support from our parent company Yufing Group, the company has been making his contribution to sustainable development of medical technology and products.