No Bubbles Bright Surface 980kg M3 Hollow Plastic Formwork

Hollow Plastic Formwork Concrete Shear Wall Formwork Replace Plastic Formwork

Product Description

Hollow plastic building formwork is a kind of energy-saving and green environmental protection product, PP plastic combined with macromolecule nano-technology.
It is a new product after wood formwork, composite steel formwork, bamboo-wood bonding formwork and all-steel large formwork. It is energy saving and environmental protection, and can completely replace the traditional steel formwork, wood formwork, square wood. It can replace the wood plywood totally, good performance than WPC formwrok and PVC formwork. What’s more, its amortization cost is very low.

Test Report

Features

The popular size is 1220*2440mm, 1830*915mm, customized is welcome.



Project Showing




Product Advantage

1. Light weight, high strength, high hardness, impact resistance, wear resistance.

2. Good toughness. perforated plank concrete wall panel system could be used as cambered special-shaped formwork.

3. No absorption of moisture, no deformation, no mildew; Long-term immersion stratification in the water, no bubbles, sheet size stability, especially suitable for underground and damp environment.

4. Surface is smooth, bright and clean; Concreting and forming effect is good for perforated steel plank.

5. Acid and alkali resistance, corrosion resistance; perforated plank concrete wall panel system is very suitable for the engineering application in coastal areas, mine, as well as seawall. perforated steel plank needs not do any preservative treatment both in using and storing the formwork, which do not pollute the concrete surface.

6. The reusable time for perforated steel plank can reach more than 60 times, long service life.

7. Waste products can be recycled and reprocessed, making full use of waste materials. This property can greatly reduce the project cost compared with wooden formwork and bamboo formwork.

8. Environmental protection and energy saving, no pollution. No any poisonous or harmful gas.

9. Demould easily. No need brushing release agent, only tapping, the perforated plank concrete wall panel system will fall off. Shorten working hours and speed up the construction schedule efficiently.

10. Easy to remove. Removing is convenient, quick and safe, and the supporting is also easy to operate, advantageous to the organization construction, effectively improving the construction schedule.

11. Easy to process. Sawing, drilling and nailing are all available. perforated plank concrete wall panel system can be combined vertically and horizontally optionally.

Packaging & Shipping
Standard Exporting Pallet Packing



General Operation And Notes Of Instrument

For perforated plank concrete wall panel system:

1. Method of use as well as wooden formwork, perforated steel plank reinforcement direction with batten direction placed in cross shaped.

2. No need to smear the mold release agent before using perforated plank concrete wall panel system

3. When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm. perforated plank concrete wall panel system don't need releasing agent.

4. The seam-line between perforated steel plank should be taped.

5. The length of nail should not be too long, generally about 30 ~ 35 mm.

6. The strength to drive nails should be moderate.

7. When removing the perforated plank concrete wall panel system, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.

8. The perforated plank concrete wall panel system accesses to be mixed used with wood veneer, bamboo veneer and other material plate.

Waying (Nanning) Trading Co,.Ltd is located in Nanning, Guangxi province, it was established in May, 2011. Our main products including building formwork panels, commercial plywood, bamboo plywood and eucalyptus veneers etc.Thanks to the efforts of all departments of the company and the abundant local eucalyptus resources, our company has made great progress. In the past 9 years, our products have been exported a lot to Southeast Asia, the Middle East, Europe and other countries, and enjoy good reputaion in market .Keeping quality as priority, We have been bestowed numerous awards, ISO9001:2008, with certficate of CE, CARB P2 & FSC.We always adhere to the customer first, and wholeheartedly provide customers with excellent products and technical support, as well as good after-sales service.WAYING is looking forward to cooperating with you.