Reducer Micro duct Connectors with Locking Clips

Brand Name:Yogel
Certification:RoSH
Model Number:DI-RDL-10/8-8/6-DT
Minimum Order Quantity:1
Delivery Time:5-8 work days
Payment Terms:L/C, T/T, Western Union
Contact Now

Add to Cart

Site Member
Location: Shanghai Shanghai China
Address: 3F, No. 322, Lane 953, Jianchuan Road Minhang District, Shanghai City China - 200 240
Supplier`s last login times: within 47 hours
Product Details Company Profile
Product Details

Microduct Connectors & Sealing

Direct Install – Blown Fiber Push-fit

Reducer Connectors with Locking Clips


Description

The Reducer allows interconnection between microducts that are difference in outer diameters. Usually, this is used in the point of tramstion from DB to DI microducts entering the office, house.


Features

  • Provides high-tensile, pressure-tight connection for microducts with different duct diameters
  • Base body made of impact-resistant material (proven with spade test followed by pressure test)
  • Transparent base body for visual inspection of the connection
  • Clamping teeth made of corrosion-free spring steel (tested according to EN 61386‑24 or EN 61386‑1)
  • Pre-fitted locking clips prevent accidental disengage when installed
  • Suitable for direct bury below ground and blow-in pressures up to 15 bar
  • Internal pressure test according to DIN 16874 (170 h/80 °C/4.0 MPa)
  • Can be removed and reused if necessary
  • Also suitable for in-house use, flame-retardant according to EN 61386-22 and halogen-free

Structure & Material


No.ItemMaterial & Description
1BodyPolycarbonate
2Seal / O-RingsNitrile Rubber (NBR)
3WasherPolyacetal
4Internal Teeth / Grip Ring / Lock ClawsStainless-Steel
5CollarPolyacetal
6ColletPolyacetal
ODOuter Diameter
IDInner Diameter
DIDirect Install
DBDirect Bury

Notes:

  1. Please confirm the microduct outer diameter whether has damaged or scratches, connection face must be clean.
  2. Please confirm the microduct outer diameter nominal tolerances meets土0.1mm.
  3. Please make sure the connection microduct end face is cut into rectangular plane.
  4. Please confirm the microduct should be through the sealing ring, have been pushed to the end of the joint, until it couldn't go far again.
  5. After connecting the microducts, must check whether the duct can pull, then put into use.
  6. When disassemble the microducts, please make sure the pressure is 0.

Specifications


Blowing Pressure

Between temperatures of -10°C and +40°C, all listed connector sizes can be used for blowing operations at pressures up to 16bar.

Between +40°C and +65°C, blowing pressures for 10mm and larger should not exceed 10bar.

Gas Tightness

Leakage at 8 bar gas pressure: 1ml/minute approx.

Leakage at 0.7 bar gas pressure: 0.01ml/minute approx.

Water IngressThe connectors shall seal against a 6m head of water
Insertion force50N max (5kg)

Retention force

(collet not held in)

25N min (3mm m/d) 125N min (8mm m/d)

55N min (5mm m/d) 125N min (10mm m/d)


Order Information


SpecificationDuct OD/ID (mm)

THR Bore

(mm)

Duct ADuct B
Reducer Connector DI-RDL-5-3/2.15/3.53/2.13.5>2.1
Reducer Connector DI-RDL-5-4/2.15/2.14/2.12.1
Reducer Connector DI-RDL-5-4/2.85/3.54/2.83.5>2.8
Reducer Connector DI-RDL-7-3/2.17/5.53/2.15.5>2.1
Reducer Connector DI-RDL-7-4/2.17/44/2.14>2.1
Reducer Connector DI-RDL-7-4/2.87/5.54/2.85.5>2.8
Reducer Connector DI-RDL-7-5/3.57/3.55/3.53.5
Reducer Connector DI-RDL-7-5/2.17/3.55/2.13.5>2.1
Reducer Connector DI-RDL-7-5/3.57/5.55/3.55.5>3.5
Reducer Connector DI-RDL-8-7/3.58/4.47/3.54.4>3.5
Reducer Connector DI-RDL-8-3/2.18/4.73/2.14.7>2.1
Reducer Connector DI-RDL-8-5/3.58/4.45/3.54.4>3.5
Reducer Connector DI-RDL-8-7/5.58/5.57/5.55.5
Reducer Connector DI-RDL-8-7/3.58/4.47/3.54.4>3.5
Reducer Connector DI-RDL-8-7/3.58/57/3.55>3.5
Reducer Connector DI-RDL-8-3/2.18/63/2.16>2.1
Reducer Connector DI-RDL-8-5/3.58/65/3.56>3.5
Reducer Connector DI-RDL-8-7/3.58/67/3.56>3.5
Reducer Connector DI-RDL-8-7/48/67/46>4
Reducer Connector DI-RDL-8.5-5/3.58.5/65/3.56>3.5
Reducer Connector DI-RDL-8.5-8/68.5/68/66
Reducer Connector DI-RDL-10-8.5/610/88.5/68>6
Reducer Connector DI-RDL-10-7/3.510/87/3.58>3.5
Reducer Connector DI-RDL-10-7/410/67/46>4
Reducer Connector DI-RDL-10-5/3.510/85/3.58>3.5
Reducer Connector DI-RDL-10-7/5.510/87/5.58>5.5
Reducer Connector DI-RDL-10-8/610/88/68>6
Reducer Connector DI-RDL-10-8.5/610/68.5/66
Reducer Connector DI-RDL-12-5/3.512/105/3.510>3.5
Reducer Connector DI-RDL-12-7/3.512/107/3.510>3.5
Reducer Connector DI-RDL-12-7/5.512/107/5.510>5.5
Reducer Connector DI-RDL-12-8/4.412/88/4.48>4.4
Reducer Connector DI-RDL-12-8/512/108/510>5
Reducer Connector DI-RDL-12-8/612/108/610>6
Reducer Connector DI-RDL-12-10/812/1010/810>8
Reducer Connector DI-RDL-12-10/612/810/68>6
Reducer Connector DI-RDL-12-8/512/108/510>5
Reducer Connector DI-RDL-12-8/612/108/610>6
Reducer Connector DI-RDL-12-10/812/810/88
Reducer Connector DI-RDL-12.7-8/612.7/108/610>6
Reducer Connector DI-RDL-12.7-8.5/612.7/108.5/610>6
Reducer Connector DI-RDL-12.7-10/812.7/1010/810>8
Reducer Connector DI-RDL-12.7-12/1012.7/1012/1010
Reducer Connector DI-RDL-14-7/5.514/127/5.512>5.5
Reducer Connector DI-RDL-14-7/3.514/127/3.512>3.5
Reducer Connector DI-RDL-14-8.5/614/108.5/610>6
Reducer Connector DI-RDL-14-8/414/108/410>4
Reducer Connector DI-RDL-14-12/814/1012/810>8
Reducer Connector DI-RDL-14-10/814/1210/812>8
Reducer Connector DI-RDL-14-12/1014/1212/1012>10
Reducer Connector DI-RDL-14-12/1014/1012/1010
Reducer Connector DI-RDL-14-12.7/1014/1212.7/1012>10
Reducer Connector DI-RDL-16-10/816/1310/813>8
Reducer Connector DI-RDL-14-8/414/108/410>4
Reducer Connector DI-RDL-14-7/3.514/107/3.510>3.5
Reducer Connector DI-RDL-16-12/1016/1212/1012>10
Reducer Connector DI-RDL-16-12/816/1212/812>8
Reducer Connector DI-RDL-16-12.7/1016/1212.7/1012>10
Reducer Connector DI-RDL-16-14/1016/1014/1010
Reducer Connector DI-RDL-16-14/1016/1214/1012>10
Reducer Connector DI-RDL-18-14/1018/1414/1014>10
Reducer Connector DI-RDL-18-16/1218/1616/1216>12
Reducer Connector DI-RDL-22-18/1422/1818/1418>14
Reducer Connector DI-RDL-20-16/1220/1616/1216>12
Reducer Connector DI-RDL-20-14/1020/1614/1016>10
Reducer Connector DI-RDL-20-12/1020/1612/1016>10
Reducer Connector DI-RDL-22-20/1622/1620/1616

China Reducer Micro duct Connectors with Locking Clips supplier

Reducer Micro duct Connectors with Locking Clips

Inquiry Cart 0