

Add to Cart
cheap price chemical process 10 liter short path distillation unit
Many materials, including petroleum,heavy residue, chemical
medicine, medicine and natural food, health care products, fatty
acid and so on, are generally heat sensitive and viscous. Moreover,
they also possess high boiling points. Separating these materials
from their components and maintaining the quality of such products
are only able to distillate at low boiling points or even lower
than the boiling temperature. Besides, it is also capable of
When the operating vacuum is about 500 Pa, it is capable of
conducting in the scratch film evaporator or falling film
evaporator. However, if the distillation is operate under the high
vacuum status( for instance, the pressure ranges from 0.001 to
100Pa), problems are bound to cause. Therefore, it is necessary to
choose the evaporator which the vapor pressure id no less than
pressure difference caused by heating and cooling surface, and the
evaporator quipped with outside condenser is excluded from the
distillation process under the high vacuum range.
In contrast, the short-path evaporator is quietly adaptable to this
occasion, and the condenser should be placed within evaporator and
opposite to heat distillation. Therefore, as a relatively new
equipment which is not widely applied in industrial production, the
short-path distillation is able to solve many tough issues that
normal distillation technical cannot conquered.
Accessories Name | Specification | Number | Unit | |
1 | 2-neck Round Bottom Flask | 10L,34/45*2,24/40 | 1 | piece |
2 | Distiller | 34/45,24/40,14/20 | 2 | piece |
3 | Fractionating device | 500ml,24/40 | 2 | piece |
4 | eggplant shaped flask | 2000ml,24/40 | 2 | piece |
5 | cold trap | 80*350mm,24/40 | 1 | piece |
6 | cold trap cover | 70mm | 1 | piece |
7 | Receiving Flask | 2000ml,24/40 | 1 | piece |
8 | Temperature casing pipe | 14/20 | 2 | piece |
9 | Temperature casing pipe | 24/40 | 1 | piece |
10 | Hollow plug | 14/20 | 2 | piece |
11 | Hollow plug | 24/40 | 1 | piece |
12 | funnel | 110mm,24/40 | 1 | piece |
13 | Mercury thermometer | 0-360°C | 2 | piece |
14 | GL14 Cover | 8 | piece | |
15 | mouth clip for Stainless steel bottle | 34# | 2 | piece |
16 | mouth clip for Stainless steel bottle | 24# | 4 | piece |
17 | mouth clip for plastic bottle | 24# | 1 | piece |
18 | silicone tube | 8*14 | 3 | meter |
19 | Wood pallet | 140 | 3 | piece |
20 | Lifting platform (stainless steel) | 200*200 | 2 | piece |
21 | iron stand | 140*200 | 1 | piece |
22 | Cross clip | 0-20mm | 2 | piece |
23 | Three claw clip | large | 3 | piece |
24 | Experimental chain clip | 1 | piece | |
25 | Three links (plastic) | 8mm | 1 | piece |
26 | vacuum fat (50g) | 7501 | 1 | box |
Total | 49 | |||
27 | magnetic stirrer heating mantle | ZNCL-T | 1 | set |
Accessories | main engine | 1 | ||
Vertical rod | 2 | set | ||
Cross clip | 2 | piece | ||
External sensor | 500mm | 1 | piece | |
internal sensor | 1 | piece | ||
Tetrafluoro rotors | 1 | piece | ||
28 | rotary vane vacuum pump | 2XZ-4 | 1 | |
29 | Temperature Control Low-Temperature Coolant Circulation Pump | DLSB-10/25 | 1 |
Short-Path Distillation | ||||
Model | SD-2 | SD-5 | SD-10 | SD-20 |
Material | G3.3 | |||
Heating Capacity(ml) | 2000 | 5000 | 1000 | 2000 |
Heating temperature(°C) | Room temperature -250 | |||
Accuracy(°C) | ±1 | |||
Vaccuum Degree(Mpa) | 0.098 | |||
Working temperature(°C) | 5-40 | |||
Voltage | 220V/50Hz or 110V/60Hz | 380V/50Hz | ||
Package Size | 450*450*600 | 580*580*735 | 850*850*600 | |
Weight | 18 | 24 | 30 |
Pre-sale Service
1. According to product’s using condition, technicians will offer
rationalization proposals to assist clients to select proper types;
2. Provide detailed product performance specification;
3. Provide professional quoted price;
4. Provide 24-hour technical consulting reply.
In-sale Service of distillation unit for sale
1. Begin to supervise from raw material, its qualified rate can
reach to 100%;
2. Whole manufacturing process are in strict accordance with
promised procedure requirements, product qualified rate can reach
to 100%;
3. Provide product’s inspection record of key junctures to
customers;
4. Provide production schedule photos to customers at regular
intervals;
5. Package and transport products strictly accordance with export
standard;
After-sale Service of distillation unit for sale
1. Under the premise of correct installation, normal maintenance
and using, we guarantee one-year warranty period;
2. When warranty period has expired, our sold products enjoys
lifetime guarantee repair, we only charge cost price for changing
product’s standard component and sealing component;
3. During installation and adjustment period, our after-sale
service staff will communicate with customers frequently to know
product’s running state in time. Assist customers to install and
adjust products until customers are satisfied;
4. If product has malfunction during operation period, we’ll offer
you satisfied answer in time. We’ll reply you within 1 hour and
provide solution or send staff to spot within 24 hours after
receiving maintenance notification.
5. Lifelong free technical support. Conduct satisfaction survey and
inquiry equipment running condition to clients by telephone or
e-mail semiannually from the first day of equipment running, put on
records of acquired information.