

Add to Cart
Photovoltaic module on grid off- grid used half cell 410W MONO
silicon Grade A solar panels
Monocrystalline Solar Panel
Features:
Due to the reduction of internal circuits and internal consumption,
the packaging efficiency is improved; in addition, the operating
temperature of the components is reduced, the probability of hot
spots is reduced, and the reliability and safety of the components
are improved. In terms of shadow occlusion, due to the unique
design, it has better anti-occlusion performance than conventional
components.
Maximum Power at STC [Pmax] | 410W |
Open Circuit Voltage [Voc] | 50.4V |
Short Circuit Current [Isc] | 10.6A |
Voltage at Maximum Power Point [Vm] | 42.3V |
Current at Maximum Power Point [Im] | 9.69A |
Power Tolerance | 0~+5W |
Module Efficiency | 20.37% |
Maximum Power at NOCT [Pmax] | 310 |
Open Circuit Voltage [Voc] | 48.9 |
Short Circuit Current [Isc] | 8.26 |
Voltage at Maximum Power Point [Vm] | 40 |
Current at Maximum Power Point [Im] | 7.76 |
Values at Standard Test Conditions STC | Air Mass AM1.5,irradiance 1000W/㎡ ,Cell Temperature 25℃ |
NOCT | Irradiance at 8000W/㎡,Ambient Temperature 20℃,Wind Speed 1m/s |
Product details:
1. Reduce heat and reduce temperature loss
As the internal current and internal loss are reduced, the
operating temperature of the components and the junction box is
reduced, and the probability of hot spots and the risk of damage to
the entire component are also greatly reduced. When the module is
working outdoors, the temperature of the half-cell module is about
1.6°C lower than that of the conventional whole-cell module.
2. Reduce occlusion loss
With its special parallel-series structure, half-cell modules can
be arranged longitudinally to increase the utilization rate of the
support and land while reducing the loss of power generation caused
by shadows.
3. Improve packaging efficiency
The packaging loss of conventional components is generally greater
than 1%, while the half-chip components are generally around 0.2%.
Therefore, the half-chip module takes advantage of the low current
characteristics, which effectively improves the packaging
efficiency of the module.
FAQ
1.Q:Do you have your own factory?
A:Yes, we are professional manufacturer mainly in solar panel for
many years. Our factory is located in Hefei, Anhui, China.
2.Q:What kind of certification you have?
A:ISO9001,ISO14001,ISO18001, TUV,CQC,CE,CEC,UL and so on.
Our products could pass different labor testing according to
different countries' requirements.
3.Q:Where we can use the system?
A:You can use the system for home, for power station, for lighting
system and so on, wnere the grid power is expensive.
4.Q:How about your warranty?
A: We provide 1.5 and 3 years warranty for different products and
whole life technical support.
5.Q:Competitive Price
A:All of our products are produced by our own factory. So the price
is very copetitive.
6.Q:How to do the installation?
A: This portable solar system installation is very simple, only
need to connect solar panel with controller, and push ON/OFF
button, then it will start to work.
7.Q:24-hours online service
A: Please feel free to contact us. Our sales team will provide you
with 24 hours better pre-sale.