IEC60884-1 Hardened Steel Manual Plug Socket Tester Apparatus

Brand Name:HeJin
Certification:calibration certificate (cost additional)
Model Number:HC9916
Minimum Order Quantity:1 set
Delivery Time:30 days
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Verified Supplier
Location: Guangzhou Guangdong China
Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Supplier`s last login times: within 23 hours
Product Details Company Profile
Product Details

Plug Socket Test Apparatus For Verification Of Maximum And Minimum Withdrawal Force


Standard:

IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 22.1, clause 22.2, figure 18&19 and table 16.


Application:

This device is used for verify whether the maximum withdraw force and minimum withdraw force to pullout a plug or plug pin from socket in the standard range. The structure of electrical accessories should be easy to insert and pull out the plug, and should prevent the plug in normal use.


Feature:

The top plate swivels up from a horizontal position to a vertical orientation and the clamping device can be rotated in the top plate. These features allow the device to be set up in many different configurations to meet different standard requirements. Standard plugs and weights are supplied to perform testing on sockets rated up to 16A.
Pin gauges and the appropriate weights for testing minimum withdrawal force are sold separately. The required dimension of the pin gauge needs to be specified by the customer.
Test plugs made from hardened steel with roughness not exceeding 0.8mm.
Top plate pivots from horizontal to vertical.


Parameter:

Test plug

Made of hardened steel.

The test plugs and pins will be made according to specific country's plug and socket requirements.

WeightsOne set. Superposition can be achieved 100N, the force applied by added weight of 1/10 test force
OperationManual
StandardIEC60884-1

Table 16 – Maximum and minimum withdrawal force for plugs and socket-outlets


Ratings of the accessory

Number of the

poles of the

accessory

Withdrawal force

N

Multi-pin

gauge

maximum

Multi-pin

gauge

maximum

Single-pin

gauge

maximuma

Up to and including 13 A2401.517
350
570
Up to and including 13 A2502.025
354
More than 370
Above 16 A up to and including 32 A2803.027
380
More than 3100
a These withdrawal forces are only for testing the resilient earthing contact assembly of a plug.


China IEC60884-1 Hardened Steel Manual Plug Socket Tester Apparatus supplier

IEC60884-1 Hardened Steel Manual Plug Socket Tester Apparatus

Inquiry Cart 0