Sand Dust Test Chamber 3KW Auto Parts Test Equipment Slide Powder Less - Than 2m/S
Brand Name:HeJin
Certification:Calibration Certificate(cost additional)
Model Number:AM0018
Minimum Order Quantity:1 set
Delivery Time:40 days
Payment Terms:L/C, T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Guangzhou Guangdong China
Address:
No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China
Supplier`s last login times:
within 23 hours
Product Details
Company Profile
Product Details
Sand dust test chamber Auto Parts Test Equipment Slide powder less-than 2m/s IEC60529:2013-13.4 IEC60068-2-68-La2, ISO20653-La2
Products Introduction:
This equipment is suitable for the test of electrical electronics, automobiles, motorcycle parts, and seals to prevent sand dust from entering the seals and housing in a sand dust environment.To test the use, storage and transportation performance of electronic and electrical products, automobiles, motorcycle parts, and seals in the sand and dust environment.The purpose of the test was to determine the possible harmful effects of the particles carried by the air flow on the electrical products.The test can be used to simulate open sand and dust air ambient conditions induced by natural or artificial disturbances such as vehicle motion.Auto Parts Test Equipment
Meet the standards:
Test requirements of household appliances, low voltage appliances, automobile, motorcycle parts enclosure in GB4208-2017-13.4, IEC60529:2013-13.4, GBT2423.37-2006-La2, IEC60068-2-68-La2, ISO20653-La2.Auto Parts Test Equipment
Design principle:
Design a conical funnel with a dust collection outlet at the bottom. Install the high pressure turbine circulation fan inlet at the vacuum extraction outlet (bottom) to send the extracted dust to the top of the inner box from top to bottom, so that the cycle will begin.Auto Parts Test Equipment
Main technical parameters:
| model | AM0018-216 | AM0018-512 | AM0018-1000 |
| Studio Size W * D * H | 600×600×600mm | 800×800×800mm | 1000×1000×1000mm |
| Outer box size W * D * H | 900×1200×1650mm | 970×1300×1700mm | 1400×1500×1900mm |
| Temperature range | Rt+10℃～60℃ | ||
| Fine dust | 75um below | ||
| Thick dust | 150um below | ||
| Airflow rate | less-than 2m/s | ||
| Slide powder dosage | 5kg/ m³ | ||
| Dust concentration | 2kg/m (adjustable) | ||
| Air metre | A 1~20L / M digital display air flow meter | ||
| Metal mesh diameter | 50um Auto Parts Test Equipment | ||
| Nominal spacing between lines | 75um or below 150um | ||
| Air blower | Full-plastic centrifugal fan | ||
| Vacuum gauge | 0～-10KPa | ||
| Internal box material | SUS 201 stainless steel mirror plate | ||
| Outer box material | SUS201 or cold tie plate paint | ||
| Control system | PLC Controller + Touch Screen Intelligent Control System (Siemens Brand) | ||
| vacuum system | Pressure regulating valve, suction nozzle, pressure regulating three-piece set, connecting pipe, vacuum pump | ||
| Dust heating system | Stainless steel mica sheet heating cover | ||
| Fundamental structure | Composition of test box, vacuum suction outlet, circulating vacuum blowing device, vacuum pumping system, flow valve, heating system, protection drying net, etc | ||
| Controller control function | Dust blowing time (stop, blow) h / m/s adjustable | ||
| Cycle cycle: any adjustable | |||
| Preset test time: 0s to 999 h99m99s is arbitrarily adjustable | |||
| Power supply mode: off-through-off Auto Parts Test Equipment | |||
| Equipment use conditions | Power supply: 380V; Frequency: 50HZ; power: 3KW | ||
| Ambient condition | Temperature of 15℃ ~35℃ The relative temperature of 25%~75%RH has an atmospheric pressure of 86 to 106 KPa | ||
| Safety protection system | Line order protection, leakage protection, overtemperature protection, abnormal protection, instrument overtemperature protection | ||
Sand Dust Test Chamber 3KW Auto Parts Test Equipment Slide Powder Less - Than 2m/S
Inquiry Cart
0