Add to Cart
RFID Card Entrance Barrier SUS304 Full-Automatic Drop Arm Turnstile
Introduction:
Full automatic Drop Arm Turnstile series can be ideal integrated with Anti-Satic ESD system for
Electronic Company and
Factory, Turnstile series available for your optional : Electronic
,tripod turnstile ,flap barrier gate ,full height turnstile
,speedgate ,sliding turnstile ,drop arm turnstile ,drop arm
security Turnstile.
Features:
1. Easy operation and convenient maintenance with functions of
breakdown self check and alarm.
2. Flexible code dialing settings, having about dozens types
performance for your selection.
3. Infrared and mechanical anti-clamping provide double protection.
When a sudden impact force is applied during system reset, the
turnstile will automatic stop or rebound, sending out alarm signal
at the same time.
4. Various alarm patterns, including illegal intrusion, reverse
passing , anti-trailing and overtime passing alarm etc.
5. Impact resistant, without receiving the open signal, turnstile
arm locks automatically.
6. Anti-reverse passing, when somebody attempt to passing
reversely, the wing quickly shuts at the same time alarms.
7. High brightness access indicator light and its humanized prompt
function, make the passageway more characteristic.
8. Adjustable for modes of normal open and normal close ,can easily
be achieved through code-dialing or external manual button
controlling.
9. Automatic detection and reset function: System will
automatically cancel the access permissions when no objects passing
is detected within the prescribed period of time (adjustable).
10. The turnstile opens automatically to evacuate people in the
event of an emergency, such as fire, power failure, etc.
11. Can be linked with a variety of control equipments, receiving
the signal of relay switch .
12. Diversify passageway modes, can be one-way or two-way passing
or one-way controlled, reverse free passage.
13. Strong environment adapting ability , Turnstile cam be
installed in any harsh environments, with strong ego protecting
ability. such as weak current, short circuit, glare, fog rain and
snow weather, typhoon or other environmental change.
Parameters:
Model No. | DA01 |
Cabinet Material | 304 Stainless Steel |
Dimensions | Cabinet:1200*980*180mm |
Motor Type | Single motor |
Weight | 70KG |
Arm Length | ≤600 |
Passage Width | ≤1200 |
Dry Contact | 12V |
Material Thickness | 1.5mm |
Card-reading Window | Two |
Direction | Bi-directional |
Service Life | 5million times |
Operating Temperature | -25℃ ~ +60℃ |
Related Humidity | ≥90%RH |
Communication Interface | TCP/IP |
Power Supply | AC 220V/110V ±10% 50/60MHZ (optional) |
Opening Speed | 30-45persons per minute |
Closing Speed | 25-35 persons per minute |
Functions:
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function.
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gates)
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, barcodes, fingerprints, etc. (Access controller needed).
9. Direction can be set as uni-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Support infrared photocell for anti-pinch and reset function
FAQ:
Q: Did your system have software interface?
A: Yes. We have our own management software.
Q: How does this system link to other system?
A: Equipment could link to others by TCP/IP.
Q:Does this combo can add extra access control method?
A: Yes,we can extend card reader,fingerprint reader and other
method to connect wire with face recognition terminal.
Q: What will happened if power was cut off?
A: Once cut off,the turnstile gates arm would be drop off,it can go
through without control.