2000W Open Type Close Type Dental Sintering Furnace

YUCERA Dental Materials And Equipment Open/Close Type Sintering Furance

Size vs. Speed

There are three main size categories of furnaces, each having their benefits and focus toward certain segments of the market. The largest ones are suitable for general production in a milling center. Features include a large volume-heating chamber, with a capacity of 150 to 200 units and are typically fired in the longer 6- to 8-hour cycles. Heating a larger chamber uniformly with a large volume of zirconia inside takes time to do properly. These are typically the most expensive, yet most productive, furnaces.

There are medium-sized furnaces suitable for laboratories and milling centers that may handle 60 to 100 units of production per 6- to 8-hour sintering cycle. These furnaces are probably the most common in use today and are generally the lowest-priced furnaces available.

Some of the smallest furnaces offer a rather unique benefit. While most only handle 20 to 50 units of production per cycle, many of them are capable of running sintering cycles in as little as 90 minutes. Smaller heating chambers can heat up and cool down quickly. These sintering furnaces can be very helpful in same-day milling and sintering of cases. However, even though high-speed sintering has been shown in some studies to provide slightly increased density and strength, not all zirconia suppliers are endorsing their use.

Dental Sintering Furnace Advantage

- Excellent in quality

- Easy operation with touch-screen technology

- High process reliability due to constant temperature control

- Perfect sintering effect

- Save time and electricity, only half the power consumption of normal sintering furnace.

- Non-microwave heating, stable performance

- The fastest program only cost 169 minutes, slow sintering and fast sintering integration

- Large capacity, three layers sinterable at one time

- Sintered state showed by Full LCD

- 20 sintering curves

- There are unique advantages sintering imported zirconia blocks

- Oversized sintering furnace

- three layers sintering box available

- Intelligent control display

Dental Sintering Furnace​ parameters

Rated voltage/frequency 220V±10%/50HZ
Rated power 2000W
Maximum load temperature 1600 ℃
Protection level IP21
Fuse 1) 2x~380V 16A 2) 250V 0.5A 3) 250V 1A
Fast fuse ~500V 32A
Net weight 62kg
Size 515*320*620mm