

Add to Cart
30 m Length 316 L Ultra Fine Woven SS Filter Mesh
Stainless Steel Screen Wire Mesh product:
Plain Weave: also called tabby weave, linen weave or taffeta weave,
is the most basic type of weaves. In plain weave, the warp and weft
are aligned so they form a simple cross-cross pattern. Each weft
thread crosses the warp threads by going over one, then under the
next, and so on. The next weft thread goes under the warp threads
that its neighbor went over, and vice versa.
Features of Stainless Steel wire mesh:
Stainless steel wire mesh is formed from stainless steel offering
good wear resistance, high strength and less technical extension.
The fine wire diameter allows good ink performance; also the wire
mesh screen has stable mechanical properties, chemical properties
and accurate sizes. The shortcoming of stainless steel printing
screen is its lack of flexibility and more expensive price. Also,
the wire mesh cannot restore properly to its original forms after
expansion.
Uses:
Widely used in printing of electronics, textiles, ceramics, glass
and other industries, also used as filter media in aviation,
aerospace, petrochemical, and other high-tech areas.
Plain Weave Stainless Steel Woven Wire Mesh | ||||||
Mesh/inch | Wire diameter (mm) | Aperture (mm) | -- | Mesh/inch | Wire diameter (mm) | Aperture (mm) |
2mesh | 1.80 | 10.90 | 60mesh | 0.15 | 0.273 | |
3mesh | 1.60 | 6.866 | 70mesh | 0.14 | 0.223 | |
4mesh | 1.20 | 5.15 | 80mesh | 0.12 | 0.198 | |
5mesh | 0.91 | 4.17 | 90mesh | 0.11 | 0.172 | |
6mesh | 0.80 | 3.433 | 100mesh | 0.10 | 0.154 | |
8mesh | 0.60 | 2.575 | 120mesh | 0.08 | 0.132 | |
10mesh | 0.55 | 1.990 | 140mesh | 0.07 | 0.111 | |
12mesh | 0.50 | 1.616 | 150mesh | 0.065 | 0.104 | |
14mesh | 0.45 | 1.362 | 160mesh | 0.065 | 0.094 | |
16mesh | 0.40 | 1.188 | 180mesh | 0.053 | 0.088 | |
18mesh | 0.35 | 1.060 | 200mesh | 0.053 | 0.074 | |
20mesh | 0.30 | 0.970 | 250mesh | 0.04 | 0.061 | |
26mesh | 0.28 | 0.696 | 300mesh | 0.035 | 0.049 | |
30mesh | 0.25 | 0.596 | 325mesh | 0.03 | 0.048 | |
40mesh | 0.21 | 0.425 | 350mesh | 0.03 | 0.042 | |
50mesh | 0.19 | 0.318 | 500mesh | 0.025 | 0.0385 |