Simplex 2.0mm Single Mode ST Connector With Black Boots

Single Mode Simplex 2.0mm ST Fiber Optic Connectors with Black Boots

Brief Introduction:

Fiber optic connectors are used for terminating the end of an optical fiber, which as we all know, are an important telecommunication medium, while also being a necessity for computer networking. For this reason, they have witnessed significant deployment in the high bandwidth communication technology, and other associated network broadcast & telecom technologies that drive modern-day media & connectivity segment. When compared to splicing, optical fiber connectors offer quicker connection and disconnection. The demand for fiber optic connectors is a subsequent result of the growing adoption of fiber optic technology.

ST Connector - Has a ferrule diameter of 2.5 mm. Most ferrules are ceramic, but some are metal or plastic. They are spring-loaded. Their usage has declined for the past many years, but they are still seen in infrastructures that were built at the turn of the 21st century.

ST Fiber Optic connectors Features and Advantages:

• High Precision Ceramic Ferrule
• Simplex or Duplex
• APC Green Polymer housing with 900μm and 3mm strain relief boot
• Low Return Loss
• Low cost
• Low environmental sensitivity
• High Precision Polymer housing
• High Precision Nickel-plated brass housing
• Low Insertion Loss
• Ease of installation
• Reliability
• Ease of use

Notes for Fiber Optic Connector Installation:

1) Besides different installation methods for different connector types, several things need to be paid attention to when installing fiber optic connectors, especially when a fiber patch cord has two different types of connectors, such as LC-SC fiber optic patch cord or FC-ST fiber optic patch cord.

2) The bared fiber must be thoroughly cleaned with fiber optic cleaning fluid. Never clean the fiber with dry tissue. Before the connection is made, the end of each fiber must have a smooth finish that is free of defects such as hackles, lips, and fractures.

3) The cable should be cut about one inch longer than the required finished length.

4) Be sure to use strippers made specifically for use with fiber rather than metal wire strippers because damage can occur and then weaken the fiber.

Application of SC Connector:

• Optical Amplifers
• EDFA& Raman Amplifier
• Fiber Sensor
• Fiber Laser
• Test Instrumentations

ST Connectors Technology Specification& Parameters:

Order Information:

More Fibre Optic Connector Types:

Geehe Service:

Who is Geehe Comm?

Geehe Comm was founded in 2006, and we have been in the Passive Optics field for more than 15 years.

We have previously focused on domestic trade OEM service for Brands in China and eventually achieved the industry's Top ten annual sales of more than 500 million.

Also OEM service for American and European brands from the 2016 year.

We have seen that today there are also many factories and wholesalers internationally. However, their level of craftsmanship and testing are still stuck in a few years ago.

In fact, the production equipment of testings has been upgraded in recent years, and Geehe Comm hopes our advanced technology can inject fresh blood into this market.

Consumers deserve a better Fiber patch cord.