

Add to Cart
Model | IV | V | 80 | 500 |
Power | 15KW | 18.5KW | 22KW | 22KW |
Capacity | 140-200kg/h | 220-260kg/h | 500-550kg/h | 360-460kg.h |
Dimension | 1.67*0.68*1.55m | 1.67*0.68*1.55m | 1.9*0.68*1.6m | 1.9*0.68*1.6m |
Diameter of briquette | 50mm | 50mm | 80mm | 50,60,70,80mm |
Intel particle size | ≤5mm | |||
Raw material moisture | 8-12% |
Introduction of Sawdust Wood Waste Chip Screw Type Briquette
Machine Factory:
1. Briquette stick making machine takes wood, sawdust, rice husk,
coconut shell, peanut shell, plant stalk, and other wood materials
as feeding materials ( no any additives) to make stick shape
briquettes under the condition of high pressure and temperature;
2. The outlet wood briquettes has the features of high density,
small volume, which can take place of fuel wood and coal;
3. The common diameter wood briquettes is 50-80mm, and the shape
can be square, hexagonal shape and round with a hole in the center.
Advantage of Sawdust Wood Waste Chip Screw Type Briquette Machine
Factory:
1. Widespread and common raw materials
2. Wide application:
3. High density, small volume,good flammability;
4. Energy saving,no smoke,no additive,environment friendly.
Raw material request ofSawdust Wood Waste Chip Screw Type Briquette
Machine Factory:
1. The feeding materials of wood briquette machine can be waste
wood branch, sawdust, coconut shell, peanut shell, rice husk and
other agriculture materials;
2. The inlet size of raw materials should be 3-5mm. If the raw
materials are bigger than 5mm, should crush the raw material
firstly;
3. The inlet moisture of raw materials should be 8-12%, otherwise, the outlet wood briquettes are easy broken and have crevice. So before briquetting, the wet materials should be dried.
Briquettes from the wood briquette machine:
1.The size: diameter of outlet briquettes can be 50-80mm;
2.The shape: the outlet briquettes of woodbriquette machine can be
round, square, hexigonal stick shape;
3. The features: the outlet briquettes are with high density, good appearance, small in size, etc.
When begin to work,the heating circle heat the machine,then wood briqutte machine can press sawdust without any binder, sawdust pressed by high temperature and high pressure , then the screw press sawust forward,extrusion into a rod-shaped solid rod with center hole.
Features of charcoal briquette machine
1.High efficiency:20 seconds 60cm briquette,250-300kg/h
2.Screw propeller adopts precision casting, special wear-resisting material life for more than ten times higher than that of traditional thrusters.Forming sleeve adopts special formula alloy precision casting, life can be up to 3 month; This cutting-edge technology not only makes the cost is greatly reduced, but also saves manpower.
Biomass wood briquette making machine agriculture waste briquetting machine
Related machines:
1) Wood crusher: Wood crusher is used to crush straw, leaves, fruit
shell, tree branches, wood sawdust, wood chips, etc. into fine
powder whose dimension less than 3mm.
2) Dryer: Dry biomass powder to make sure the powder's humidity
less than 12%.
3) Wood briquette machine: Use screw biomass briquette machine to
shape biomass
powder into briquettes.Sugarcane firewood sawdust rice husk
charcoal briquette press charcoal making machine
4) Carbonization furnace: If you want to make briquette charcoal ,
we need carbonization furnace to burn biomass briquettes into
charcoal briquettes.