

Add to Cart
Anti Clogging Diffused Silicon 20mA Submersible Pressure Sensor
<1>. submersible Water Level Sensor, its 304 &316 stainless steel and hermetically sealed housing make it suitable for most industrial liquids and oils.
<2>. The welded housing is tested in-house via a helium leak tester to ensure proper protection.
<3>. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank.
<4>. The conductors of the cable are also isolated from the outside environment to keep the level sensor operational for long-term use.
Model | liquid water level sensor |
Measuring Range | 0~0.5~500m H2O |
Power supply | 12~36VDC (Standard 24VDC) |
Output Signal | 4~20mA; 0~5V; 1~5V; 0-10V; RS485 |
Accuracy | 0.2%F.S; 0.5%FS |
Response Time | ≤1ms (up to 90%FS) |
Long-term Stability | ±2F.S/Year |
Medium Temperature | -20~85℃ |
Working Temperature | -40~80℃ |
Overload Capacity | 200%F.S |
Insulation Resistance | 100MΩ/250VDC |
Sensitivity Drift | ±2%F.S |
Zero Drift | ±2%F.S |
Protection | IP68 |
Measuring Medium | Various medium which is compatible with SS304 |
Mechanical Vibration | 20g (20~5000Hz) |
Impact | 100g (11MS) |
Material | Junction box: Low content Cu-Al alloy Probe: Stainless steel Cable: Polyurethane cable |
Application | Static liquid level, Liquid tank, Sewage water, Well, Lake,etc. |
Feature:
1. High Precision Diffused Silicon Sensor
● High accuracy 0.2%FS
● Short response time 1mS
● 1500VDC high withstand voltage
2. Anti-clogging Filter Probe
Protective filter can filter all kinds of impurity particulate
matter in mesured liquids, effectively protect the sensor and
circuit board inside the probe.
3. Ventilation Cable
Connect with atmosphere, to Offset the atmospheric pressure on
sensor
Notes: Please contact us if you need more detailed protocol.
1. Select the place easy to operate and maintain the installation.
2. Keep away from vibration source installation.
3. Try to stay away from heat sources.
4. When the input liquid level transmitter is installed, the metal
probe should be sink into the bottom of the container.