Electro Pneumatic Control Valve Positioner
Brand Name:POWERFLOW
Certification:ISO9001. CE. Nepsi
Model Number:1600
Minimum Order Quantity:1 Nos
Delivery Time:10-15 Days
Payment Terms:T/T
Contact Now
Add to Cart
Verified Supplier
Location:
Hangzhou Zhejiang China
Address:
Unit E, NO.11 XiYuan Eight Road, XiHu District, HangZhou City, Zhejiang Province, China.
Supplier`s last login times:
within 46 hours
Product Details
Company Profile
Product Details
1600 Series IP66 Protection Class Smart Electro-pneumatic Valve Positioner with Feedback
1. Product Description
1600 series intelligent electro-pneumatic valve positioner is designed for integral pneumatic control valve, particularly suitable for angle seat valves and diaphragm valves.
The product is easy to operate and has rich software functions. It can easily be operated via the LCD and keypad.
The positioner adjusts the valve position quickly and accurately through detecting the position sensor signal.
2. Basic advantages
- Compact stainless steel design
- Electrical waterproof connectors
- LCD with backlight
- Easy to start-up
- Rich additional software functions
3.Technical Datas
| Material | PC,PA6-GF30,Stainless Steel,SI |
| Power supply | 24V DC ±10% |
| Set-point signal | 0/4-20mA or 0-5/10 V |
| Input resistance for set-point signal | 240Ω at 0/4-20mA, 21KΩ at 0-5/10V |
Control medium Dust concentration Particle density Pressure condensation point Oil concentration | Neutral gases, air DIN ISO 8573-1 Class 5 (<40μm particle size) Class 5 (<10mg/m3) Cass 3 (<-20°C) Class 5 (<25mg/m3) |
| Ambient Temperature | 0-70°C |
| Pneumatic Connection | Plug-in hose connector G1/4(internal Φ6mm) |
| Electrical Connection | M12 3-pins B-coded(cable ø 4-6mm) M12 4-pins D-coded(cable ø 4-6mm) M12 5-pins A-coded(cable ø 4-6mm) |
| Supply Pressure | 3~7 bar, specific values depending on the actuator |
| Air Flow Rate | 17 L/min, 58 L/min(only single-acting) |
| Stroke Control Range | Linear 5-50mm Rotary 90° |
| Installation | As required, Preferably with actuator in upright position, Screw. |
| Protection Class | IP65 |
| Power Consumption | <5W |
| Explosion Proof | Ex nA IIC T4 |
4. Additional software functions
- Selection of the transfer characteristic between set-point value and stroke
- Sealing function for position controller
- Effective sense of direction between input signal and set-point value
- Limit of the machanical stroke range
- Setting for control parameters
- Safety position setting for the position controller
- Configuration of signal level fault detection
- Activating of the binary outputs
- Configuration of the outputs
- Calibrating the control parameters
- Setting for manual control rate
- Code protection
5. Product type selection
Remark:
In the air flow rate option, code Q1 is suggested to match the actuator of 40-100 mm internal gas chamber diameter, code Q2 is suggested to match the actuator of 125-160 mm internal gas chamber diameter. Code Q2 is only used for single-acting actuator, and only in Freeze state when power-off. The air flow rates for code Q1 and Q2 are under the condition of 0.6Mpa input pressure.
In the valve max stroke option, AT actuator range for code S4 is AT50~AT125. For other actuator models, please consult our company. It is no need to select the thread type option for code S4.
Power off state for single-acting option is Safe by default.
6. Schematic diagram
Electro Pneumatic Control Valve Positioner
Inquiry Cart
0