Reflective Thermoplastic Road Marking Paint

GB Thermoplastic Reflective Road Marking Paint (20% glass bead )

Thermoplastic road marking paint consists of petropols, EVA, PE wax, glass bead, filler material, which is solid powder condition at normal temperature.
It is heated to 180~200 degrees by heat fusing pot under constyuction, it will appears flowage, coating the paint to the road surface and will form hard film, It has full line type, strong wearing resistance and other flowage.
Sprinkling reflecting glass micro beads on the surface under construction, it has good reflecting effect at night.
It is widely applied in highway and road. According to the environment used and the different construction requirements, we can supply different types of paint for our customer option.

FEATURES:
Strong adhesion strength: Resin content is reasonable, and it was added special rubber elastomer in the primer, so it has strong adhesion strenght. If the construction technique is reasonable, there is no peeling off.
Good cracking resistance: Thermoplastic line marking is easy to form crack because of the temperature variation of thermoplastic line marking.
Bright color: The paint adopts the color of the highest level with reasonable proportion, so it has good weather resistance and will not change color if long term exposure.
High usage ratio: The major feature of paint is low density, big volume and high usage ratio.
Good dirt resistance: The dosage and quality of PE wax are the key point of impacting the dirt resistance. PE wax of Exxon is our first choice for many years.

THEORETICAL DOSAGE:

ATTENTION:
To sure the working environment clean and dry, suggestions the construction temperature be above zero(if the construction temperature is too low should be emprove the matiel temperature)
Temperature should be controlled between 180~200 degrees when melted the paint, be fully mixing after melting, in order to reflect the performance of paint, heat preservation for 3-5 minutes after discharging.
The primer processing should fully, stay at the primer to dry fully before coating. For the new cement road surface, need to delay three months to construct or twice processing with the primer, otherwise easy to peer off.
If consturction with more vehicles, after process the primer, should place the roadblock prevent the wheel rolling and take away the primer leave dust, otherwise easy to appear part marking peel off.

Packaging & Shipping

Our Services
*Supply the best quality products with a best price, inform regular customers the market information. To establish long-term friendly cooperative relations.
* Arrange the orders and shipping with customer requests in time, According to the different countries export policy provide complete customs clearance documents.
* Our company is a professional manufacturer of hot-melt marking paints for 30 years, with an annual output of 250, 000 tons, accounting for 25% of China's marking paint market. At the same time, it undertakes marking projects in many domestic cities and is currently exporting hot-melt markings. Coatings all over the world, our company has independent R & D team, will be customized according to the requirements of customers in different countries customized coatings, the current major export markets are Africa, Southeast Asia, and South America and so on.

OUR Certification

FAQ

Contact way

LUHU Traffic Facilities limited liability company was established in 2008, the company is located in Guangzhou City, Company employees 60 people, annual output value of more than 10 million. Factory with 1000 square meters, is a design, production, sales, after-sales service of large enterprise specializing in the production of transport facilities.now has 10 experienced teams of marking, year marking the construction of 500,0000 square meters.

Main products: road marking paint, road marking machine, traffic signs, , security fence, traffic cones, warning column, wheel Locator, speed bumps, wall guard, parking lock, convex mirrors