Product Details
LIYI Humidity Stability Chamber , 80-800L Benchtop Test Chamber
This Chamber can simulate different environment condition. It's
appropriate for testing material performance, such as resist heat,
resist dry,resist humidity and resist cold. That can define
performance of material.
Standards:
GB/T2423/5170/10586, JIS C60068, ASTM D4714, CNS3625/12565/12566
etc.
Characteristics:
1. Freezer imported by the French original armored warrior
compressor and use environmental-friendly refrigerant (R134A,
R404A, R23).
Frozen system uses units or low-temperature dual-loop system
design.
2. Use more powerful wing-blower air supply cycle, to avoid any
dead end, temperature and humidity are evenly distributed in the
test region.
3. Wind-road cycle adopted the design of blowing side wind and
return wind. Wind pressure and wind speed are in accord with test
standards, and make the door instantaneous temperature and humidity
open that is stabilized time soon.
4. Heating, cooling, humidification and dehumidification system is
totally unaided to improve efficiency, reduce testing cost,
increase life expectancy and lower failure rate.
Model | LY-280 | LY-2150 | LY-2225 | LY-2408 | LY-2800 |
Inner Size W×H×D(cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 |
Outside Size W×H×D(cm) | 93×155×95 | 100×148×106 | 117×166×91 | 140×176×101 | 170×186×111 |
Volume (V) | 80 L | 150L | 225L | 408L | 800L |
Temp and Hum Range | A:-20°C~150°C B: -40°C~150°C C: -60°C~150°C D: -70°C~150°C RH20%-98% |
Wind Cycling Way | Centrifugal fan-broadband type forced air circulation |
Refrigeration Way | Single stage compression refrigeration |
Refrigerator | French Tecumseh |
Refrigerants | R4O4A USA DuPont environmental protection refrigerant(R23+R404) |
Condensing Way | Air-cooled or water-cooled |
Water Supplying Way | Automatic cycling water supply |
Standard Accessories | 1 Observe window(double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line. |
Safety device | Non- fuse-switch(compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch,fuse stoppage warning system |
Detailed Images
Company Information
Guangdong LIYI Technology Co.,Ltd is a high technology supported
production-oriented enterprise who specializes in developing,
manufacturing, marketing all kinds of environmental equipment. Our
company has advanced technology, experienced technical management
personnel and efficient professional service staffs, fine quality
management and perfect after-sales service system.
Our company mainly produce simulated environmental tester, plastic
and rubber tester etc. on all kinds of materials testing
industries. The production base is located in the country’s
manufacturing center Dongguan, Guangdong province, China. In order
to service our customers better in terms of reducing costs and
early delivery, in 2005 we had set up an office in Kunshan, Jiangsu
province for Eastern China marketing and servicing.
Liyi deals with customers from more than 150 countries and regions.
Meanwhile, we are committed to cooperate with different dealers in
different countries and regions in order to offer better service.
Our mission is to help every customers establish testing labs to
ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We
combine with the international testing standards and the specific
demands of customers that may establish a new banner in Chinese
testing industry.
Company Profile
Dongguan LIYI Test Equipment Co., Ltd (Dongguan LIYI Environmental
Technology Co.,Ltd) is a solution provider of material and product
reliability testing products since 2008. We are a technology
oriented company, which designs and manufactures test equipment for
various kinds of industries. Since its establishment, LIYI’s
enterprise purpose is"To Create Value For Customers, To Create
Benefits For Enterprises, To Create Wealth For Employees, and To
Create Prosperity for The Community". LIYI has always remembered
its Enterprise Purpose and it helps LIYI developed rapidly and
steadily. With the rapid and steady development as well as the
constantly improving capabilities of marketing and production, LIYI
has became one of the leading companies for testing equipment in
Pearl River Delta Region, Southern China. With more than 10,000
square meters of plant as headquarter in Dongguan, LIYI also has
four brother-sister companies, three sales subsidiaries and an
independent import and export department with the rights to deal
international business. Products of LIYI’s are sold to more than
100 worldwide Countries and regions.
As a technology-based manufacturing enterprise, LIYI pays attention
to the cultivation of innovative thinking, increases R&D
investment, and enhances the innovative strength of enterprises.
Now it has more than 30 intellectual property patents, and has
obtained “Dongguan Private Technology Enterprise”, “Guangdong
Province "Private Technology Enterprises","Guangdong High-tech
Enterprises" and other awards. After obtaining ISO9001
certification in 2010, it successively passed the certification of
the German TUV and CE Certificate. LIYI is a professional test
equipment manufacturer in producing different kinds of
environmental chambers like Temperature and Humidity Chamber,
Thermal Shock Chamber, Walk-in Chamber, ESS Chamber, UV Accelerate
Weathering Chamber, Xenon Chamber, Industrial Oven, and so on.
"Establish An Image of LIYI, To Create A Brand Called LIYI." The
company will adhere to meet the market demand, insist on product
innovation and service innovation. We will strive to become China's
bench-marking enterprise of testing equipment.