Steam Superheater CFB Boilers Serpentine Pipe For Carbon Steel

Brand Name:HDT
Certification:ASME, TUV, SGS, ABS, PED, ISO9001, Grade A
Model Number:HDT-ST001
Minimum Order Quantity:5T
Delivery Time:60-75days
Payment Terms:L/C, T/T, Western Union
Contact Now

Add to Cart

Verified Supplier
Address: Rm. 1202, Buildiing A, Wanda Plaza, Zhangjiagang, Jiangsu, China
Supplier`s last login times: within 1 hours
Product Details Company Profile
Product Details

Steam Super Heater Boiler Spare Parts Serpentine Pipe For Carbon Steel CFB Boilers


Superheater&Reheater, Custom Component For Boiler Superheater coil


A superheater is a component that heats saturated steam in an industrial boiler, turning it into superheated steam. Our superheater guarantees that the superheated steam temperature will fluctuate to within an allowable range (normally varies from 540°C to 500°C)when the boiler is over loaded.


ASME certificate boiler parts boiler superheater China factory direct sell


1) Both Radiant-Convective and 100% Convective Available


2) Assemblies Completely Self-Supporting (No Intermediate Support Brick Required


3) All Elements of Equivalent Length Ensuring Balanced Flow


4) Conservative Velocities Inside Tubes Assure Positive Cooling at All Loads


5) Fully Drainable

Super heater types:
1. Radiant super heater: it is the earliest type of super heater and it is located above or behind banks of water tubes to protection them from direct flam or fire.
Parameters that increases the convection

a. Increasing the fuel-and air flow (combustion gas flow)
b. Increasing the mass flow rate of the steam

Radiation is mainly dependent on the flam temperature. as the steam flow rate increases the exit temperature become lower.
Radiant super heater
They are placed exposed to the heat source whcih requires the improvement of metal temperatures.

Radiant and convetive super heaters and reheaters are used for high temperature steam.
The accessory of high temperature radiant steam super heater in boiler

It is made up of snake-like tubes (carbon steel, alloy steel or heat-resistant steel, etc.) and collection boxes and other supporting material. Tubes generally have φ32, φ38, φ42 or other types of specifications, according to user's needs separately.

Reheaters
They are the sane as the super heaters but as their exit temperature is a little bit less than super heaters and their pressure is 20% -25% less than the super heater, they can stand less quality material alloys.

Application:
Steam super heater is consisted of dense tube coils and is placed in the flue under the tempearture 450ºC-1000ºC.
For power plant boiler capacity over 10Mpa, platen and coiled superheater are usually adopted.


Functions and characteristics of superheaters and reheaters


functions of superheaters and reheaters:


Superheaters and reheaters are important parts for the heating surfaces, used to increase steam temperature, aiming to improve steam enthalpy and further to increase the thermal circulation efficiency for power station.


Superheaters work to heat surnatured steam to superheated steam with a certain tempetature. When boiler loads or other working conditions change, it is necessary to make sure superheated steam temperature to be normal, and within allowable range of temperature variation.


From the thermal circulation in power station, the original parameters of pressure and temperature is higher, the thermal efficiency of circulation is better, or the steam humidity of the steam turbine rear is too high, influencing its safety. While the superheaer steam temperature is limited by metal materials, at present, due to limitation of metal materials, superheated temperature for most power station boilers are still within the range of 540-555 dgrees, and to avoid the steam humidity of blade of steam turbine rear too big, thus middle reheating system is applied.


What are the differences of Superheater And Reheater?


TypeAdvantagesDisadvantagesSupporting method
Pendant-type1.Firm structural support1. Flow blockage by condensed steam 2. Needs slow restart to purge the water that accumulates in the bottom.supported from above
Inverted-type1.Proper drainage of the condensed steam1. Lack the structural rigidity, especially in high speed gas flowSupported from below
Horizontal -type

1. Proper drainage

2. Good structural rigidity.

1. They do not view the flam directly so they are mainly from the convective typeUsually supported in the vertical gas ducts parallel to the main furnace.

Details


Setting Information
processwelding
structurehorizontal or vertical
materialcarbon steel, alloy steel
tubesφ32, 38, 42, etc.
sizecustomized
brandHTEG
Warranty18 months

Design structure

1. heating saturated steam, temperature up to 900 degree C.


2. high efficiency, >90%.


3. high speed heating.


4. design with stainless steel.


5. long design service life, 15 years.



Send us required technical data, such as steam capacity, presure, required temperature etc. We will design accordingly.


China Steam Superheater CFB Boilers Serpentine Pipe For Carbon Steel supplier

Steam Superheater CFB Boilers Serpentine Pipe For Carbon Steel

Inquiry Cart 0