

Add to Cart
Low Cost Prefab Steel House Sandwich Panel House Construction
Are you still considering building a small house at a lower cost?
Sometimes, construction cost becomes an important consideration.
There may not be a complete industrial chain in the local area, resulting in very high construction costs or labor costs.
Our prefabricated steel home is definitely a principle worth
considering. Sometimes you may not want
a very luxurious building, just satisfy living or have a place to shelter from wind and rain.
We can customize such a low-cost building for you.
Such a prefabricated panels house is like a tool for you, you can
pack it and take it to any other place,
because it is very easy to build and dismantle, and does not need to spend a lot of time and manpower.
Such a prefab house can also be used as a warehouse, or you can use
your imagination to make a kitchen.
There is our contact information on the website, and we can also
see it by simply leaving a message.
Our customer service staff will reply to your message as soon as possible.
Or if you are in a hurry, we can also contact you by phone.
Once you are satisfied with the plan we made for you, we will give
you the most reasonable quotation,
and we can also help you purchase other furniture or basic supplies
you need.
You just need to tell us your needs, it doesn't cost any money.
After-sales service is also guaranteed. We are responsible for the
quality of our products.
You can buy and consult with confidence.
Our house can be used for more than 20 years, after which we can
recycle steel or use it for other things.
We are here waiting for your news.
Detail Specification
I. Steel Structure | ||
1. | Ground beam Material: Galvanized steel | |
2. | Corner Column Material: Square tube Powder spraying | |
3. | Wall column Material: Square tube Powder spraying | |
4. | Gable column Material: Square tube Powder spraying | |
6. | Lintel Material: black strip steel / galvanized steel sheet Powder spraying (Black steel strip) | |
7. | Roof Purlin Material: Galvanized steel | |
8. | Herringbone beam Material: Galvanized square tube + Galvanized Angle iron | |
II. Accessories: | ||
1 | Floor Flashing Shaped Groove Function: Put between the wall panel and ground beam, block the inflow of rainwater Material: Galvanized steel plate | |
2 | Eave Cover Function: Seal the exposed part of the roof rock wool and guide the rainwater down Material: Galvanized steel plate | |
3 | Outside Ridge Cover Function: Cover the roof ridge above sandwich panel Material: Galvanized steel plate | |
4. | Inner Ridge Cover Function: Cover the roof structure ridge on the Herringbone beam Material: Galvanized steel plate | |
5 | 50mm U Shaped Steel Groove Function: Fix the partition panel Material: Galvanized steel plate | |
6 | Buckle cap Purpose: Used in the joints of roof sandwich panels to prevent rainwater from infiltrating Material: Galvanized steel plate | |
7 | Bolts, Screws and Glue The choice of screw is important, good quality screws easy to be insert in the steel will help installation work; Otherwise, will waste time for insert the screw. | |
8 | Galvanized Steel plate corner Function: Seal the corner of the partition board and the wall Material: 0.4mm Galvanized steel plate | |
III. Maintenance and Decoration Material | ||
1. | Sandwich wall panel Material: 50kg/m3 density rock + 0.4mm galvanized steel plate on both sides | |
2. | Sandwich roof panel Material: 50kg/m3 density rock + 0.4mm galvanized steel plate on both sides | |
3. | Door Material: 0.45mm steel plate on both Middle: Honeycomb panel Door Frame: 0.8mm steel Lock: Lock with handle type (Easy to open and close ) | |
4. | Window Window frame: 8.0mm plastic steel Glass: 2.2mm single glass | |
5. | Ceiling Material: 7.5 mm Gypsum Ceiling with accessories |