

Add to Cart
Simple maintaining And Running Gas fired Automatic Hot Air Boiler
Metallurgical industry will use hot furnace, blast furnace ironing process, will use hot furnace to send hot air to blast furnace, generally configured three hot air furnaces, the use of two-burn one send-off mode. Hot furnace for heat storage, in the blast furnace ironing process, first to the hot furnace sent into the blast furnace gas, the blower to the hot air furnace drum into the air, ignition, so that the blast furnace gas in the hot furnace combustion, the heat storage generated In the heat storage brick of the hot furnace, after combustion is completed, the air that will be sent into the blast furnace is first sent to the heat ingest furnace, which is heated by the heat storage brick in the hot air furnace, which increases the air temperature back into the blast furnace and reduces the amount of coke used in the process of ironmaking in the blast furnace.
Parameter
LRF-60 SCI
NO; | Name | Unit | Number | Description |
1 | Rated output | Kcal | 600,000 | |
2 | Heating efficiency | % | 80 | |
3 | Grate area | ㎡ | ||
4 | Design fuels | / | Biomass,coal,rice husk... | |
5 | Fume temperature | ℃ | 150-550℃ | |
6 | Bulk size | mm | 1950*3950 |
LRF-120SCI
NO; | Name | Unit | Number | Description |
1 | Rated output | Kcal | 1200,000 | |
2 | Heating efficiency | % | 80 | |
3 | Grate area | ㎡ | ||
4 | Design fuels | / | Biomass,coal,rice husk... | |
5 | Fume temperature | ℃ | 150-550℃ | |
6 | Bulk size | mm | 2400*5400 |
1. provide full range of original spare parts.
2. Engineers abroad installation and commissioning service is
available.
3. Our engineers will held a training for boiler workers to
ensure the safe operation.
4. Free maintenance and repair for one year and lifelong
service.