

Add to Cart
Soil stabilization machine WBZ600 plant continuous mixing different gradings stabilized soil for road construction
WBZ600 Cement Stabilized Soil Mixing Machine introduction
The Jianxin brand WBZ600 Stabilized Soil Mixing Station production
line adopts a forced continuous twin-shaft type in the form of
agitation. It can mix gravel and stabilize soil and lime soil to
stabilize soil. It is suitable for construction of highways, Class
I highways, Class II highways, urban roads, airports, sports fields
and other basic materials. It can use quicklime, hydrated lime
(water content 10-15%), soil, Raw materials such as gravel, fly
ash, and cement are used to produce base materials such as ash.
Unlike common ram mixing plants, new users need special attention.
WBZ600 Stabilized Soil Mixing Station (mixing station) uses
twin-shaft continuous linerless mixers for easy maintenance, even
mixing and high production efficiency. The ingredients are
electronically weighed or volume-measured, the measurement is
accurate and reliable, and the ratio changes rapidly. The computer
control system manages the entire process, with manual and
automatic selection, convenient operation and good reliability.
Speed adoption of international advanced frequency control or
electromagnetic speed control will save energy, stepless speed, and
fully guarantee the reliability of equipment operation. Intelligent
turbine flowmeter for water supply, accurate calculation, intuitive
display. Aggregate and finished material conveyor adopts seamless
vulcanized joint ring tape or large angled wave rib belt, which is
compact in structure, stable in operation, reliable in operation,
not easy to deviate, and effectively improves the service life of
the belt. Aggregate bins are modular or modular, flexible and
suitable for different levels of demand.
Mixing system
The main body of 600T stabilized soil mixing plant adopts
double-shaft compulsory continuous propulsion mixing mode and
double-shaft compulsory-type linerless mixer; advanced performance.
The shaft end seal uses world-class technology, and the shaft end
support is completely separated from the shaft end seal. Mud and
sand are difficult to enter the bearing, the replacement is quick
and convenient, and the maintenance time is extremely short; the
mixing drum has large capacity, uniform mixing and high
productivity.
Batching system
The batching system of 600T stabilized soil mixing plant is
composed of aggregate storage bin and belt conveyor; the block type
silos are all connected by pin shaft, which is convenient to
disassemble, quick to install, flexible in transportation and
transportation; electromagnetic speed control belt conveyor can
realize stepless speed regulation .
Conveyor system
The belt conveyor of 600T stabilized soil mixing plant is a
collecting material and finished material conveying. It adopts
small angle angle belt conveyor, high quality seamless vulcanized
joint ring tape, compact structure, stable and reliable operation,
not easy to deviation, and effectively improve belt service life.
Control System
The control system of 600T stabilized soil mixing plant has manual
and automatic selection, convenient operation and good reliability.
The operation of each component is centralized and controlled on
the console. The whole set of equipment only needs one operator.
The main electrical components are purchased from internationally
renowned manufacturers, which fully guarantees the product quality.
Cement silo
The flaky cement silo of 600T stabilized soil mixing plant is
designed and produced for the difficulties of packing and packing
of cement silo, difficulty in on-site cylinder making, difficulty
in transfer of construction site, and super high and super wide
transportation. Cement silos (cement tanks) are in line with
industry standards. The unloading height is 1.96 meters and 4.2
meters, and can also be processed according to user requirements.
The overall cement silo of the 600T stabilized soil mixing plant is
a closed storage tank for storing grain, cement, fly ash and other
materials. The tank body is equipped with a material level system,
which can display the position and quantity of the material. There
is a safety valve, a dust removal device is installed on the top of
the warehouse to avoid dust pollution, and the arching device can
relieve the solidification caused by the material deposition for
too long.
The horizontal cement silo of the 600 stabilized soil mixing plant
has a cylindrical structure, and the bottom is supported by four
round tube legs. The whole warehouse is in the form of steel
structure and welded; the top is provided with a dust collector and
a pressure safety valve. The horizontal cement silo meets the
industry standard.
The screw conveyor of 600 stabilized soil mixing plant adopts high
quality steel pipe with good rigidity; double pitch blade reduces
the degree of material conveying compression; high quality gearbox,
heavy duty design, large torque and low noise; optional universal
ball joint, It is convenient to turn the installation and
adjustment;
Technical Parameters
project | WBZ600 |
Maximum productivity | 600t/h |
Measurement method | Volume measurement Computer measurement |
Speed regulation mode | frequency control Electromagnetic speed regulation |
control mode | automatic |
Manual | |
Quantify precision | aggregate ±3%(volume),±2%(Electronics) |
Powder ±2%(volume),±1%(Electronics) | |
water -1~2% | |
Power | 170.5kw |
Weight | 54t |