600W 30L Low Noise Ultrasonic Cleaner PCB Ultrasonic Cleaning Bath
Brand Name:XUWEN Ultrasonic Pcb Cleaner
Certification:CE
Model Number:Ultrasonic Pcb Cleaner
Minimum Order Quantity:1pc
Delivery Time:Within 3-8 working days upon receipt payment
Payment Terms:T/T, Western Union, MoneyGram,Paypal
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
3.2L/4.5L/6.5L/10L/15L/22L/30L Ultrasonic Cleaner Power Adjust
Stainless Steel Bath Oil Rust Degreasing Ultrasound Cleaning 40kh
Q: How Does Ultrasonic Cleaner Work?
A: The ultrasonic signal generator generates high-frequency oscillation signals and converts them into tens of thousands of high-frequency mechanical vibrations per second through the transducer, which acts on the cleaning fluid, causing countless tiny bubbles in the cleaning fluid to continuously produce and burst. This phenomenon Call it the "cavitation effect". When the bubble bursts, it can form an instantaneous high pressure of more than 1000 atmospheres. A series of bubble bursts release huge energy, continuously impacting the surface of the workpiece, so that the dirt in the working surface and gaps can be quickly peeled off, so as to achieve the purpose of surface purification.
Q: How to operate the ultrasonic cleaner?
A:1. Put the items into the cleaning basket, and then put the cleaning basket into the cleaning tank.
2. According to the cleaning effect that needs to be achieved, pour the cleaning liquid in proportion.
3. Connect the power of the ultrasonic cleaning machine and turn on the switch button.
4. Adjust the temperature of the ultrasonic cleaning machine according to the cleaning requirements.
5. Set the cleaning time, generally 5-10 minutes can be cleaned. For objects that are difficult to clean, the cleaning time can be appropriately extended.
6. After cleaning, disconnect the power supply of the machine, pour out the cleaning fluid, and clean the tank and its surroundings with a clean rag for the next use.
Q: What are the precautions for the use of ultrasonic cleaners?
A: 1. DO NOT Operate if the tank is empty. After use, switch off and disconnect the power.
2. DO NOT use solvents, and corrosive or flammable solutions as these can damage the unit.
3. When using, the cleaning fluid should not be too little, generally 2/3 of the tank is the best.
4. Do not put the items directly at the bottom of the cleaning tank, use a special cleaning stand or cleaning basket.
5. When adding or changing fluid, the power must be disconnected.
*110V/220V is available, leave message if you have requirement.
600W 30L Low Noise Ultrasonic Cleaner PCB Ultrasonic Cleaning Bath
Inquiry Cart
0