

Add to Cart
24KW Uf Filtration System Customized Water Filtration Equipment
Brackish Water SUS 316 FRP 380V Ultrafiltration System
380V Ultrafiltration Systems Water Treatment / Ultra Filtration
Membrane Device
Description Of Ultrafiltration System
Ultra-filtration technology is a pressure driven membrane separation process that removes suspended or particulate matters (including colloids & silt) from water. It serves as a pretreatment for surface water, sea water and biologically-treated municipal effluent before reverse osmosis and other membrane systems. This solution is far more reliable than a conventional multimedia filter. In addition to superior turbidity removal, UF membranes efficiently remove bacteria.
1. Ultrafiltration(UF): filter accuracy up to 0.01μm, completely
remove the bacteria, parasites, suspended sediment and other
pollutants in the water,effectively remove the algae, the
solubility of chlorine and harmful heavy metals(lead, cadmium,
chromium, etc.).
2. 99.999% remove the bacteria, pesticide residues, rust, red
worms, parasites, sediment, dust, chlorine (chloroform) and other
impurities in your tap water.
3. High efficient of filter bacteria, rust, red worm, residual
chlorine.
4. Turns ordinary water into healthier, great-tasting alkaline and
ionized drinking water.
Specification
Raw water test report | seawater and brackish water |
Material | SUS 304/ 316/ FRP |
RO Purified water capacity | 70T UF+100T RO |
System recovery | 60%-70% |
Desalination ratio | 97.3%-98% |
System working Voltage/Power | 110V / 220V / 240V/380V/450V 24KW |
Feed water Capacity | 70T UF+100T RO |
Outlet Purified water standard | TDS<1000PPM ; TDS<2PPM for drinking standard |
Feature Of Industrial Ultrafiltration System
1) ultra filtration (UF) systems is small footprints and easy
operation
2) High degree of automation of ultra filtration (UF) systems
3) Different Molecular substances can be classified and treated
4) UF mineral water treatment is applicable for different kinds of
water quality and can be widely used
Parts are in Ultrafiltration(UF)system
1. Water tank: storage of tap water, to solve the problem of
insufficient tap water pressure and the back booster pump due to
the impact of insufficient water, reduce the failure rate
2. Booster pump: equipped with a stainless steel pump, to provide
sufficient pressure for subsequent filtration.
3. Quartz sand filter: mainly remove the mud, suspended solids and
large particles in the tap water.
4. Carbon filter: mainly remove organic substances, residual
chlorine and odor in tap water.
5. Water softener filter: mainly remove the calcium and magnesium
in tap water, reduce the hardness of water.
6. Security filter: further filtration, protection of later UF
membrane.
7. High pressure pump: provide enough pressure for UF (ultra
filtration) system.
8. UF (ultra filtration) unit: the core part of miniral water
equipment, the production of mineral water.
9. mineral water tank: storage mineral water, can change the size
of the water tank, after the below process, The water result is
pure enough for different application.
Ultrafiltration System
1. Import parts over 90%,water conductivity<10μm/cm.
2. Meet GMP Standard.
3. Will be test before shipping.
Ultrafiltration System are used for
What is UF(Ultra filtration) in general?
Ultra filtration (abbreviate UF)water treatment system is a process
of separating suspended macromolecules from wastewater by using
membreane and pressure differential. The membreane used in the
process is a selectivelypermeable membrane which resists survival
of macromolecules above a certain size when passing through,and
it's in this manner, it becomes an expert in retaining
macromolecules, colloids, microorganisms and pyrogens and it is
commonly applied to water purification system.
Warranty: One year since the date of installation. If there is any
wearing part be broken within the warranty and isn’t caused by
un-properly operation, then the Seller would offer the new parts
for free.New Model High Efficient Tilting Vacuum Emulsifying Mixer
Machine For Cosmetic
Inspection: The buyer will do the machine inspection when the
machines are ready.
Machine Installation or Fixing: If Buyer requires Seller’s engineer
to install or fix the machine locally in due course, the Buyer
should pay the round air ticket cost and arrange the hotel
accommodation as well as the means for Seller’s engineer.