Swirling Automatic Self Cleaning Filter Water Pipe Filter System For Different Flow Rate

Automatic Swirling Self Cleaning Water Pipe Filter System For Different Flow Rate

Product Industrial:

The automatic self cleaning filter is consisted of filter vessel, stainless steel filter screen, differential pressure switch, time-delay device and pneumatic drain valve. The liquid flows into vessel,filtered by the filter screen and flow out from outlet.So the impurities are intercepted in the filter screen. When the differential pressure reaches the pre-determined value, the filter automatically start the self-cleaning process and the impurities will go out from the drain valve.

The water flows through the screen and the particles are retained on the inside of the screen of the filter element. The filtered water then flows out through the outlet.When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level, the flushing cycle starts. It include two steps: First, the automatic drain valve opens on the drainage outlet. Then, electronic motor drives the cleaning brushes which are inside the screen, the solids are expelled through the drain valve. Filters continue to supply filtered water even during the flushing cycle.The whole working system is controlled by a smart box which has several control modes: pressure differential, time,manual and PLC.

Product Feature:

1. Simple and reliable structure;
2. Short Backwashing time,big flow,Small pressure drop loss(under0.018MPa);
3. Control mode has press difference control,time control and hand control;
4. The device can be connected to the DCS system；
5. High filtration precision,Stable water quality,Sewage water consumption<1%
6. The filter is used for life without replacement
7. Long service life
8. Low running cost, easy operation management
9. No filtration interruption when self-cleaning

Application:

1. Metallurgy: Continuous caster waste water, High pressure phosphorus removal water, Clean circulating water,Turbid circulating water filtration, Cooling water full filtration, Bypass filtration, Nozzle protection, etc.
2. Power: Steam turbine cooling water filtering, Grey water recycling, Dust fall nozzle protection, Cooling tower water filter and Bypass filter;
3. Raw water: Lake water, River water, Reservoir water, Well water, Rain water, Pumping Groundwater filtration of sand ,algae and organic;
4. Agriculture: Water treatment of sprinkler irrigation and drip irrigation;
5. Others: Construction, Steel, Petroleum, Chemical, Electronics, Generating electricity, Textile, Paper making, Food, Sugaring, Pharmaceutical, Plastics, Automotive industry, etc.

Product Technical Parameters:

Product Design Features

1. Suitable for the high flow rate, low-viscosity fluid filtration.

2. The filter has the ability of retrieving the instable flow rate and adjusting the time of cleaning without manual operation.

3. Filter screen is easy to be cleaned and it is not consumption part.

4. When the fitler is cleaning the filter screen, the inflow can keep working at the same time.

5. The time of cleaning process is so short that it will save raw material and power.It is very environmental.

6. Compact construct design,small floor area. Easy installation and moving flexiblly.

7. The filter has less wearing parts, no consumption parts and much lower operation and maintenance cost.

8. With extensive application filed,the filter could meet different requirements of various raw water.

9. with larger filtration area and little loss of pressure, more impurities can be filtered.

10. Every parameter can be adjusted according to the actual working condition.

XinXiang XinLi Filter Technology Co., Ltd. is one of the earliest specialized in sintered metal filter equipment R & D and manufacturing of production-oriented enterprises, the company has international advanced production equipment, technology and perfect quality inspection system, as well as many years of training together a professional engaged in a vacuum sintering and filtration equipment design andmanufacturing of the technical team, product quality to meet international technical standards for the same period of the product.