60W Integrated Solar LED Street Light With Auto Intensity Control Solar System

80w High power solar powered led street light with auto intensity control solar system

Every solar street light proposal must specify:

• • Number of solar panel(s)
• • Type: Mono-crystalline or Poly-crystalline
• • Power of solar panels: Total Wattage
• • Mounting to the pole: on top of the pole, side of the pole

All of the above mentioned points rely heavily on the specific requirements and the specific location (both micro and geographical) for every project in question. For example, when considering to install solar street lights, you should always pay attention to the surrounding objects, especially if they create shading that could decrease the solar panel performance. Believe it or not, this matter is usually overseen by many solar street light users. Knowing the geographical location of the solar street light project helps in configuring the solar panel power (total Watts) and in setting the appropriate angle of the solar panel fixture.

Useful tip: If you are located in the Northern hemisphere, your solar panels should be faced south. If your location is in the Southern hemisphere, the panels should be directed towards north. In most cases, the angle of the solar panel should be between 30 and 40 degrees. The more you go towards northern locations the angle of the panel should increase. For example, if your solar street light project is in Sweden, you would probably go with 90 degrees angle of the solar panel.

• • Solar Panels
• • LED Light
• • Solar Rechargeable Battery
• • Smart Solar Controller with inbuilt wireless communication
• • Remote Management Software
• • Motion Sensor
• • Pole
• • Interconnecting Cables

Smart solar street lights use new LED technology which delivers much higher Lumens for less energy used. LED lights with lower wattage than traditional style fixtures are more efficient and have lower power consumption while providing higher luminosity levels and zero UV emissions. LED fixtures are also less prone to failures with an average number of 50,000 working hours, whereas traditional street lights range from 5,000 to 8,000 working hours with much higher failure rate.The energy consumption rate of LED fixture is at least 50% lower than high pressure sodium (HPS) fixtures.

Solar street lights are designed to absorb energy during the day. This energy is used by the off-grid system to power LED lighting during the night. The solar panels start working as soon as the sun is up while the LED lamp automatically switches off after the sunrise. The process is reversed when the sun goes down. The solar energy detection can be done either through solar panel sensing (this functionality works by detecting solar panel voltage which will increase immediately when sunlight hits the panel and vice versa) or through an astronomic clock built in the solar system (microchips using latitude and longitude clock combined with real time clock to decide when to flip a switch). The main function of the solar panels is to convert sunlight into electrical energy through photovoltaic solar cells. This energy is then stored in solar rechargeable batteries.