1OZ Copper 8 Layer Pcb Finished Board Thickness 1.6MM FR4 Material Making

8 Layer HDI PCB Board , Finished Board Thickness 1.6MM , FR4 Material

8 Layer HDI PCB

PCB Specifications:

Layer Count: 8Layer HDI PCB

Board Thickness: 1.6MM

Material: FR4

Min Hole: 0.1MM

Min Line: 3/3 Mil

BGA Size: 10Mil

Unit Size: 92*78mm/4up

Hole: L1-L2, L2-L7, L7-L8, L1-L8

Solder Mask: Green

Surface Treatment: ENIG

Application: Camera

Capabilities:

FAQ:

Question: What is the standard format you accept?

Answer: We accept standard gerber format file.

Question: Do you accept sample orders?

Answer: YES, we do accept sample orders.

Question: What is the difference between your two factories?

Answer: The HuiZhou factory mainly produce sample and small batch pcbs. The JiangXi factory has more roboticized equipments, so it prefers big batch production.

Question: What is a High-Density Interconnect PCB?

Answer: HDI stands for ‘High Density Interconnects’. An HDI PCB is a dense version of a printed circuit board where the components are placed closer to each other allowing the overall board size to be smaller. HDI printed circuit boards use optimized routing, smaller components, BGA component footprints and optimized vias to make connections between the components on the board.

In regular PCBs we use through hole vias to connect multiple layers of the board to each other. A traditional via goes from the top of the PCB to the bottom, connecting all the layers, as seen in the image below. These vias are easy to deploy as they can be drilled through the board from top to bottom using a regular drill. The main disadvantage of regular vias from a space optimization point of view is that this via will connect all the layers of the board, even those that do not need to be connected to each other and thus can result in wastage of space within some layers of the PCB.

An HDI PCB uses different types of vias – microvias, buried vias and blind vias to optimize the space requires for interconnections between the layers and components.

Microvias are ultra-small vias which can be drilled using lasers. They are much smaller in diameter than regular vias.

A Blind via connects the outer layer to an inner layer, with access to only one external layer.

A Buried via can connect inner layers of the same substrate or multiple substrates, with no access to external layers as seen below.

Blind or buried via gives access to only functionally required layers, and as a result do not occupy space on all the layers at a given time. This provides more space for components with enhanced routing within the traces. A designer can mount more components to increase the board density or can reduce the board size as per the requirement.

Advantages of an HDI PCB Board:

• HDI PCBs allow for increased component placements on both sides of the PCB thereby making the board smaller and lighter
• HDI PCBs can reduce the amount of laminate material required. This can result in lower pricing of a board when using a very expensive laminate material
• HDI boards can improve signal transmission along with a reduction in signal loss and delays as connection paths are shorter
• Provides better heat dissipation

Witgain Technology Ltd was established in 2007 in ShenZhen City. After over 10 years development, the company now posses two factories. One factory located in HuiZhou City which is near to ShenZhen. The other one locates in JiangXi Province. Marketing dept still locates in ShenZhen City.

We have about 300 employees in two factories and the monthly output is around 30000m2. Our marketing orientation is to make high difficult and special treatment pcb. Even though, we still accept normal 2-layer and multi-layer pcb orders. Our products cover simple double layer pcb, multi-layer pcb, HDI pcb, rigid-flex pcb, fpc, ceramic pcb, heavy gold/copper pcb etc. Wide product ranges and flexible order quantities allow us to satisfy most customer's demands.

Quality and technology is what we value most and we will never stop improving our capabilities. Our customer's satisfication is always what we are seeking for.