Six Layer Rigid Flex Printed Circuit Board 1.6mm Green Solder Mask FR4+PI

6 Layer Rigid Flex Printed Circuit Board , 1.6mm , Green Solder Mask , FR4+PI

6 Layer Rigid-Flex Printed Circuit Board

PCB Specifications:

6Layer Rigid-Flex PCB

Board Thickness: 1.6MM

Material: FR4 +PI

Flex Layer: L2-L5

Rigid Layer: L1 And L6

Min Hole: 0.3MM

Min Line: 4/4 Mil

Hole: L1-L6

Unit Size: 200MM*120MM/2up

Solder Mask: Green

Surface Treatment: ENIG

Application: Medical Equipment

Product Lead Time:

FAQ:

Question: What is the main feature for rigid-flex pcb

Answer: 1) Because it's flexible, so it can be installed stereoscopically

2) Easy to be installed and save space

3) High stability

Question: What are Flexible Printed Circuit Boards?

Answer:

A Flexible Printed Circuit Board (PCB) is a board that can be bent to conform to a desired shape during its application. The board can be bent or twisted without damaging the circuit. The substrate material used to build the PCB is responsible for its flexibility. Polyamide, PEEK (Polyether ether ketone) or a transparent conductive polyester film are common substrates used to make flexible PCBs.

The layers of a Flex PCB are more or less the same as a Rigid PCB, with the addition of an overlay, or coverlay i.e. a lamination process used to encapsulate and protect the external circuitry of a flex circuit. This is similar to the solder mask layer in a rigid PCB. The coverlay film is a polyimide film which is coated with a thermoset adhesive. It protects the flexible circuit from damage. The coverlay is optional, but most flexible PCBs do use this.

The fabrication of flexible PCBs does cost more than rigid PCBs, however they have a number of advantages in certain applications and thus the cost can be justified. For example, they can replace bulky wiring in Satellites where space and weight are the main constraints for the designers. They are also in LED Strips, consumer electronics and a number of other applications.

Other advantages of flexible Printed circuit boards are that they are lighter than rigid boards and have improved resistance to vibrations and movement so are often used in transportation applications.

Witgain Technology Ltd was established in 2007 in ShenZhen City. After over 10 years development, the company now posses two factories. One factory located in HuiZhou City which is near to ShenZhen. The other one locates in JiangXi Province. Marketing dept still locates in ShenZhen City.

We have about 300 employees in two factories and the monthly output is around 30000m2. Our marketing orientation is to make high difficult and special treatment pcb. Even though, we still accept normal 2-layer and multi-layer pcb orders. Our products cover simple double layer pcb, multi-layer pcb, HDI pcb, rigid-flex pcb, fpc, ceramic pcb, heavy gold/copper pcb etc. Wide product ranges and flexible order quantities allow us to satisfy most customer's demands.

Quality and technology is what we value most and we will never stop improving our capabilities. Our customer's satisfication is always what we are seeking for.