Round Titanium Alloy Rod AMS4928 AB-3 Beta C Ti-6Al-6V-2Sn-0.5Cu-0.5Fe

AB-3Ti-6Al-6V-2Sn-0.5Cu-0.5Fe titanium bar titanium alloy rod bar titanium round bar

AMS 4928 aviation standards titanium bar

Standard:AMS 4928

Material grade:Beta C (Ti-6Al-6V-2Sn-0.5Cu-0.5Fe)

Diameter:5.0-100mm

Length:6000mm Max

Diameter tolerance:H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements

Ti-6Al-6V-2Sn-0.5Cu-0.5Fe is a kind of titanium alloy.This material have the advantage of light weight, corrosion

resistance of pure titanium itself.And because of these chemical components(V, Sn etc.) added, its hardness

and strength have been greatly increased. The alloy also has good hot workability(including conventional process

performance and superplasticity), and can be welded and machined in various ways. The beta heat treatmentand

is other mal forging of this alloy have achieved rapid development.The alloy is mainly used for the manufacture of

compressor disks, blades, drums and other parts of aircraft engines,and can also be used to manufacture aircraft

structural parts. Through the thermal deformation and heat treatmentin the α-β region, the maximum long-term working temperature of the alloy is 500 ° C. The semi-finished products produced include bars, forgings and die forgings.

Ti-6Al-6V-2Sn-0.5Cu-0.5Fe titanium alloy is a widely used high-temperature titanium alloy with a maximum operating

temperature of 500 ° C.It is mainly used in aircraft engine compressor components such as blades, discs, drums and

shafts. It can also bemade into special-shaped castings. The working conditions of the parts are that they can be used

for 500 hours below 500 ° C and 100 hours below 550 ° C and 1000 hours below 450 ° C in the annealed state, and

can be used for 100 hours below 500 ° C in the strengthening treatment Parts and parts that work at a time below 700 ℃.

We,Baoji Lihua provide Manufacturer TC (Test Certificate) in accordance to EN 10204/3.1B, Raw Materials Certificate,

100% Radiography Test Report, Third Party Inspection Report. We also provide Standard certificates like EN 10204 3.1

and additional requirement like. NACE MR 01075. FERRIT CONTENT as per norms if requested by clients.

• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report

• Third Party Inspection Report, etc

We focus on every procedure to assure quality, the package we usually take is pack Titanium Round Bar with environmental poly bags, and then in free fumigation wooden cases or wooden palte. Also can accept customized package such as OEM by negotiation. We offers just about everything to meet your Titanium Round Bar pack requirements. Lot of emphasis is placed on the packing and packaging. The Round Bar are packed in wooden corrugated boxes foiled in plastic wraps and bubble wraps.

Baoji Lihua Non-ferrous Metal Co., Ltd. was established in 2006. The company relies on theadvantages of Baoji industry and its strong technical support. It has been engaged in theproduction and sales of non-ferrous metals such as titanium, tantalum and nickel for many years.

The factory covers an area of 800 square meters. The factory has strong technical equipment. There are more than 20 sets of CNC machines, milling and drilling machines, and the annualproduction value is more than 30 million CNY.

The company's product is high quality and stable for many years, and it has obtained the Certification ISO 9001:2015, BV audit certification.

The company has been focusing on the improvement and stability of product quality for many years. Based on the business concept of maximizing customer service, we warmly welcome you to come for advice and business negotiation!