Medical N95 Face Mask Making Machine , N95 Mask Production Line Easy Operate
Brand Name:oem
Certification:CE FDA
Model Number:oem
Minimum Order Quantity:1
Delivery Time:5-20 days
Name:N95 Mask Production Line
Contact Now
Add to Cart
Active Member
Address:
ROOM 1105, KAITAI BUILDING, RUIAN, ZHEJIANG,CHINA
Supplier`s last login times:
within 17 hours
Product Details
Company Profile
Product Details
Medical N95 Face Mask Making Machine , N95 Mask Production Line Easy Operate
KN95 mask equipment is the special equipment for the production of disposable KN95 masks.It can automatically complete the mask body molding,automatic nose bridge reinforcement, and automatic ear band welding.
It is the auto equipment which is used to the product of face
masks,It suitable for the material of non woven fabric, activated
carbon and filter material from 1-5 layers. The face mask machine
will finish all the processing from the feeding to nose-clip
fixing, edge sealing, cutting the finished products.
According to the different materials you use, the finished products
can reach the standards as N95, FFP2, etc.This face mask machine
has features as stable performance, high productivity, low error
rate and easy operation, etc.
| Size | 6800mm(L)×3600mm(W)×1900mm(H) |
| Mask specification | 175*95mm |
| Production efficiency | 100-120PCS/min |
| Qualification rate | 98-99% |
| Failure rate | 2% |
| Weight | ≤2100kg, ground load bearing > 300kg |
| Working power | 220VAC ± 5%, 50z, rated power about 6.5-8.5KW |
| Compressed air | 0.5 ~ 0.7MPa, the use flow rate is about 300L / min |
| Operating environment | temperature 10 ~ 35 ºC, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000). |
Plane Mask Production Process:
1) Three layers of non-woven fabric materials are stacked together through a machine
2) Roll up and stitch the nose clip into it
3) Make a large piece of non-woven fabric gradually narrow from left to right along the slope to make a "folding structure"
4) Tableting: flatten the surface of the mask
5) Fully automatic single cutting and hemming of masks
6) Then use a non-woven fabric to trim the mask
7) Cut the edge again
8) Fix the hanging ear rope by hot pressing
9) Finally pass the quality inspection, sterilize and package the finished product
Standard export packaging:
1. Apply anti-rust oil to the equipmenteasy rustypart and carry out
anti-rust treatment.
2. The whole machine was wrapped with stretch film for
protection,and the equipment control cabinet and other components
are protected against shock with packaging materials like XPS foam
board and EPE foam sheet.
3. Reinforceeasy-movepart of the equipment.
4. Put desiccant before packaging to avoid rusting equipment during
sea transportation.
5. Use New Zealand imported bluish pine wood or American Douglas
fir wood as the bottom support, 12mm multi-layer plywood for side
panels, all wood fumigated. We cooperated withexperienced and
professionalexported wooden packaging manufacturing enterprises to
make final package.
| tion and commissioning. | Due to the special period, party A(Supplier) is unable to provide on-site installation and debugging service. After installation and debugging, party A(Supplier) shall notify party B(Buyer) to accept the equipment. Upon completion of acceptance, party B(Buyer) should ship the whole machine.Provide non - contact installation instruction such as instructional video and remote video instruction. Non-epidemic period, We will send 1~2 engineer for installation, training and testing in customers' factory, offer complete technical support, after-sale service, maintenance skills training. The air ticket, hotel and food accommodation shall be offered by the buyer and need to pay 100 USD/day/person as technical fee. |
| Warranty period and service |
|
| Delivery time | 30 days |
Medical N95 Face Mask Making Machine , N95 Mask Production Line Easy Operate
Inquiry Cart
0