Infrared Sensor Anti Microbial 0.8MPa Touchless Faucet Adapter
Brand Name:CARE4U
Certification:CE FDA
Model Number:touch sensor faucet
Minimum Order Quantity:Negotiable
Delivery Time:ship on the second day after payment received
Payment Terms:T/T, L/C, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
Infrared Sensor Anti Microbial 0.8MPa Touchless Faucet Adapter
Usage Maintenance
- When battery is with low power, the indicator light will flash slowly for 5 times when put hand, indicating that it needs to be charged, can continue to use;
- When battery is with very low power, the indicator light will flash 10 times when put hand, indicating that the battery needs to be charged urgently, the water should be forcibly turned off.
- Product can not work normally when charge it and should turn off the handle of the faucet in advance.
- USB cable and power adapter are not included with product itself.
Technical Parameters
| Battery Capacity | 3.7V Iithium battery (400m Ah) |
| Charging Specifications | Micro USB Charging (5V/ 500-1000mA) |
| Product Size | 47mmx47mmx79mm |
| Standby Power Consumption | <0.2mW |
| Sensing Range | Side :1 -6cm; Bottomil -10cm |
| Applicable Water Pressure | 0.05-0.8MPa |
| Fitting Faucet Nozzle | Male M24*1/ Female M22*1 |
| Environmental Temperature | 1-40°C |
| Environmental Humidity of Using | <95%RH |
| Water Efficiency Level | Level 1 |
| Waterproof Level | IP65 |
Precautions for Usage
- When the faucet is not used for a long time, please close the handle.
- Please ensure that the water supply pressure is within the range of 0.05-0.8 MPa, otherwise there may be dripping or water leakage.
- When using the product, please make sure that the USB charging protection plug is tightly fitted, in case gas enters and rusts the charging port
Details
FAQ
1 Water leakage after istallation
1.1 Please confirm whether there is a gasket at the inlet joint and
whether the
gasket thickness is suitable.
1.2 Please confirm whether the water pressure is within the range
of 0.05-0.8 MPa.
2 No water when sensing
2.1 Please confim whether the faucet handle and the inlet angle
valve are open
and whether the water is stopped.
2.2 Please confirm whether the surface of the side and bottom
sensor windows
are covered with water or covered with mist, ceaning it is ok.
2.3 Please confirm that there should be no obstacles within 30cm of
the side and
bottom sensor windows.
2.4 Please confirm that the sensor window indicator flashes once
when using.
If it flashes continuously or does not flash, please use it after
charging.
3 Intermittent water or water can not stop
3.1 Please confirm whether there are large drops of water on the
surface of the
side and bottom sensor windows or covered with mist, and wipe them
dean
3.2 Please confirm that there should be no obstacles within 30cm of
the side and
bottom sensor windows.
Warranty
1. 12 months after slling.,
2 Any quality ises arising from the fllowing actions are not covered by this
warranty.
2.1 Quality problems due to improper nstallation, replacement, repair,
and like these are not covered by this warranty.
22 Products for industrial and commercial usage.
23 The quality problems caused by misuse, abuse, neglect and the use of
nonoriginal accessories. Such as using a hard rag such as a steel ball or a strong
acidbase cleaner to clean the product, resulting in a sensing window and The
outer casing is scratched and corroded; the water pressure is not used in the
limited range of the product; the water quality is blocked or rusted due to poor
water quality etc.
2.4 Damage caused by other rresistible factors.
2 Any quality ises arising from the fllowing actions are not covered by this
warranty.
2.1 Quality problems due to improper nstallation, replacement, repair,
and like these are not covered by this warranty.
22 Products for industrial and commercial usage.
23 The quality problems caused by misuse, abuse, neglect and the use of
nonoriginal accessories. Such as using a hard rag such as a steel ball or a strong
acidbase cleaner to clean the product, resulting in a sensing window and The
outer casing is scratched and corroded; the water pressure is not used in the
limited range of the product; the water quality is blocked or rusted due to poor
water quality etc.
2.4 Damage caused by other rresistible factors.
Infrared Sensor Anti Microbial 0.8MPa Touchless Faucet Adapter
Inquiry Cart
0