

Add to Cart
The water well sand control filter screen tube is composed of a "V"-shaped or wedge-shaped stainless steel wire and a stainless steel support bar. The smooth surface of the filter element is the filter surface, and the gaps are strips, which belong to the surface filter form. As a variety of automatic filters (such as automatic backwashing, scraper self-cleaning, scraper self-cleaning, suction self-cleaning filter) filter elements are widely used in fluid filtration in various industries.
Item | water well sand control filter screen |
Material | Stainless steel 304, 304L, 316L 321 can be made. |
Profile Wire | 1.52*2.54mm |
Support Rods | 3.8mm |
Round | From 2.5mm to 6.0mm |
Slot Size | 0.5mm |
Pipe Length | 2.8 meter |
Pipe diameter | 29mm to 1200mm |
Pipe Screen Ends | Plain Beveled ends, male/female threaded, flange or close up. |
1. Easy to leak, wear and corrosion resistance.
2. The cross section of the mesh is trapezoidal. The gap is narrow
at the top and wide at the bottom.
3. It is a screen bar made of cold-rolled stainless steel wire. The
support bar is welded by automatic mine screen production
equipment. The screen seam is uniform, the welding quality is
stable, the opening rate is high, the service life is long, and the
strength is high. Rigidity and bearing capacity can be made into
rigid screening and filtering devices of various shapes.
We can produce products according to the needs of our customers.
Material: stainless steel 304, 316L, low carbon steel
Diameter: minimum diameter 32mm, maximum diameter 1270mm
Length: single tube can be up to 6 meters in length
Gap: 0.25mm, 0.5mm, 0.7mm, 1.0mm, 1.5mm is a regular gap. We can
produce gaps of 0.1-50mm
Joints: Generally, there are joints at both ends of the pipe, such
as flanges, weld rings, or threads, so that the pipes can be
connected to meet the needs of use.