Volvo EC210B Excavator Spare Parts Threaded Interface Swing Motor M5X130 Swing Device Parts For Volvo EC210B Excavator

Volvo EC210B Excavator Spare Parts Threaded Interface Swing Motor M5X130 Swing Device Parts For Volvo EC210B Excavator

Product Description

The Threaded Interface Swing Motor M5X130 is a specific type of swing motor.

Its design features a threaded interface, which usually means that the motor is installed

or connected in a threaded form, which is convenient for precise docking and fixing

with other components or equipment.

The following is a detailed introduction to the Threaded Interface Swing Motor M5X130:

Basic parameters and characteristics
Model meaning: The "M5" in the "M5X130" model indicates a certain series or specification of the motor,

while the "X130" may represent specific performance parameters, size or power level. However,

the specific explanation needs to refer to the manufacturer's official instructions or technical documents.

Threaded interface: "Threaded Interface" refers to the motor with a threaded installation or connection interface,

which makes it easy to connect and fix the motor with other components with corresponding threaded interfaces.

Application areas: Due to its special interface design and swing function,

the Threaded Interface Swing Motor M5X130 may be used in the Volvo EC210B Excavator.

Technical Details and Specifications
Rated Voltage and Current: Although the specific values ​​are not given directly,

this type of motor usually has clear rated voltage and current requirements to ensure its performance

and safety under normal working conditions. Users should ensure that the power supply conditions

meet the requirements when selecting and using it.

Torque and Speed: Torque is an important indicator of the motor's output torque, which directly

affects its driving ability; while speed is related to the motor's operating speed and working efficiency.

For the Threaded Interface Swing Motor M5X130, these parameters may vary depending

on the specific application scenario and requirements.

Reduction Ratio: If the motor is equipped with a gearbox (such as the "16T" in the

M2X150-16T mentioned above, which indicates a gearbox with a reduction ratio of 16:1),

then its reduction ratio will be an important technical parameter used to adjust the speed and torque

of the output shaft. However, for the M5X130 motor, whether it is equipped with a gearbox

and the size of the reduction ratio need to be specifically confirmed.

Photo Details


More Models Of Excavator Swing Device (Whatsapp Number: +86 18928932952)

Company Profile

At Guangzhou Huilian Machinery Co., Ltd (EB Seals), we have been in the excavator spare parts industry

for 13 years and offer a wide range of high-quality parts and services to meet all of your needs.

We specialize in excavator swing device, so you can keep your equipment running smoothly.

When it comes to choosing the right excavator swing device for your needs,

our knowledgeable staff is always available to help you find the right part for your appliCATEEEEEEEEion.

We understand that having reliable and high-quality swing device is critical to the performance

and efficiency of your machine, which is why we are committed to providing our customers

with the best possible service and support. At Koko Shop, we offer fast shipping and competitive prices

on all of our products. Contact us today to learn more about our selection of control valves and services.

Specializes in:
--Excavator spare parts
--Hydraulic breaker hammer parts

Below details
Address:GUANGZHOU HUILIAN MACHINE EQUIPMENT CO., LTD.
Name:Wendy
Website:https://www.excavatorbreakerparts.com/
Tel: +86 18928932952
WHATSAPP:+8618928932952
E-mail:huilianparts0711@163.com
Website:excavtorbreakerparts.com

Koko Shop Machine Co.,Ltd (Huilian Machinery) found in 2011, is a professional supplier who is specializd in construction machinery parts for excavator and attachments, including Hydraulic Hammer, Hydraulic Breaker Spare Parts, Quick Coupler, Hydraulic Grab, Ripper, Vibrator, etc. And, Excavator parts Engine, Hydraulic Pump, Swing motor, Travel motor, Main control Valve, Swivel Joint, Hydraulic seal kit. After 12 years developments, Huilian Machinery factory make quality parts with it's advance technology and advance machines. Hydraulic Breaker Parts suitable for: Atlas copco, Soosan, Furukawa, Atlas Copco, Alpha, Bretec, BTI, CATEEEEEE, CP, Daemo, DMB, Alicon, D&A, Doosan, EDT, Epiroc, Everdigm, Fine, Furukawa, General GB, Hammeroc HR, Hyundai HDB, Indeco HP MES, JCB, Kent, KCB, Komac, Komatsu JTHB, JKHB, Korota, Krupp, Kwanglim, Konan, Montabert, MSB, MTB, Noah, NPK, Okada, OKB, Omal, Poqutec, Powerking, Promove, Rammer, RB Hammer, RBI, Rhino, , Soosan, Stanley, Teisaku, T&H, Toku, Toyo, UBTECH, ECand so on. Hydraulic Excavator Parts suitable for: Komatsu, Hitachi, EC, Hyundai, Kobelco, Sumitomo, Kato, Doosan, JCB, cx, Sany, Liugong, XCMG, Xugong, Zoomlion, etc. OEM and ODM service offered.

In order to meet different customers' needs, Huilian Machinery also purchases Genuine Parts from German, Japan, Korea. And we established a long-term business relationship with customers from all over the world, like: U S A, Mexico, Saudi Arabia Kenya, Algeria, UAE, Russia, Morocco, etc. In 2023, Huilian Machinery became Distributors of easywork engineering machinery (SANY Group) in Russia and indonesia.

Koko Shop Machine is continuously seeking the chances to meet all the friends both from home and abroad for win-win cooperation.

And we believe that quality parts will take us to a further place. Let’s build a better tomorrow, together!

Introduction to Koko Shop Company

CertifiCATEEEEions

Enteprise Honor

Service Brand

Our Factory

Koko Shop Machine Management Department is an important control method for processing quality. It equipped with the most advanced inspection equipments The professional control devices,it can provide accurate reference data to choose the most suitable material and accessories, which also effectively control parts quality. Besides, it also provides digital information for engineers and quality controller to determine feasibility for spare parts after processing. This is the working processing of quality control.

Chooing steady quality supplier. After purchasing raw material, duing testing if it is proved well, then we will arrange these eligible matrial that come into warehouse.

When the spare parts finish and come into testing working conditon. Every worker will be responsible for their spare parts. They will give out fact testing date and results. After proving testing date is accord with delivery standard. Then Koko Shop Machine Quality Management Department will allow these spare parts that go to packing department and packing.

Before delivery, Koko Shop Machine Quality Management Department should check all mark and packing conditon. If it is prove it is accord with exporting standard and customer's requirement. Then they will allow these equipment come into fininshed product area.

Of course Koko Shop Machine Quality Management Department have the right to make sample testing for every production step to make sure product quality.