Multiple Purpose Strong Rebar Adhesive Syringes Non Shrinkage High Expansion
Brand Name:XINCHOR
Model Number:FixingChor 139
Minimum Order Quantity:100pcs
Delivery Time:30 days
Payment Terms:L/C, T/T
Place of Origin:China
Contact Now
Add to Cart
Site Member
Location:
Hangzhou Zhejiang China
Address:
1ST FLOOR, UNIT 1, NO.9 GUANSHAN ROAD, FENGDU INDUSTRIAL PARK, PINGYAO, YUHANG, HANGZHOU, ZHEJIANG
Supplier`s last login times:
within 48 hours
Product Details
Company Profile
Product Details
390ml 3:1 Ultimate-Performance Injectable Epoxy Mortar, Injectable Adhesive
Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,
Chemical anchoring system used for anchoring and rebar connections in concrete.
Item #: FixingChor139
Capacity: 390ml
Materials: Epoxy
Mixing Ratio: 3:1
Product Description:
390ml 3:1 Ultimate-Performance Injectable Epoxy Mortar, Injectable Adhesive
Adopted with modified epoxy resin and composite materials, XQ-IME Injection Anchoring Adhesive is a two-component, Styrene Free system for use as a high strength, non-shrink anchor grouting material. Its advantage on steel bar planting has been proved by many testimonies. Compares with other adhesive, it is a new high performance, Eco-friendly anchoring adhesive which has strong bonding strength and high efficiency as well as irritation free and low odor.
Advantages
- Low sensitivity in moist condition with long term load stability;
- acid-resistant, good shock resistance, stress-free fixed;
- good thixotropy, particularly applicable to the sides or top surface anchoring;
- two-cylinder direct-mix package, with a dedicated glue gun without manual mixing
- High bonding strength, good flexible performance similar as embedded.
- Ageing resistance, good heat tolerance and does not creep at ambient temperature;
Application:
- All concrete building without embedded steel bar
- Reinforcement and reconstruction of buildings with concrete
- Reinforcement and reconstruction of Railway, Road, Bridge, Water resources, Tunnel, etc.
- Reinforcement for equipment, pipeline installation, supports of curtain wall.
Technical Parameter:
1. Basic parameters
1) Appearence
Part A (main): white cream
Part B (hardener): red cream / grey cream
2) Mixed Viscosity: 18-22Pa.s
3) Hardened density: 1.50±0.10g/cm3
4) Mixing ratio (Volume ratio): 390ml(3:1)
5) Shelf time: 24 months
2 Main Performance
| Testing project | Condition | Index | ||
| Gel Performance (According to China National Standard GB50728-2011) | ||||
| Splitting Tensile Strength (MPa) | Under (23±2)℃, (50±5)%RH, tested by loading speed of 2mm/min | ≥8.5 | ||
| Flexural Strength (MPa) | ≥50 (no fragment damage) | |||
| Compressive Strength (MPa) | ≥60 | |||
| Bonding Capacity (According to China National Standard GB50728-2011) | ||||
| Steel-Steel Tensile Shear Strength (MPa) | (23±2)℃ (50±5)%RH | ≥10 | ||
| Bonding strength of Ribbed steel bar (or screw) with concrete under constrain drawing condition | (23±2)℃ (50±5)%RH | C30,Ф25,L=150mm | ≥11 | |
| C60,Ф25,L=150mm | ≥17 | |||
| Steel-Steel T-peeling strength (mm) | (23±2)℃,(50±5)%RH | ≤25 | ||
| Ageing resistance to heat and humidity 90d | ||||
| Reduction rate of tensile strength | Under normal room temperature | ≤12% | ||
| (According to China National Standard JGJ145-2013) | ||||
| Tensile Strength (after high temperature welding) | Dia12 Grade II steel, C30 concrete Hole dia.16mm, Depth: 150mm | 55.1N, 57.0N, 54.8N | ||
3 Technical Data
Anchoring Adhesive used with thread rod
| Thread Rod Dia | C30 Concrete | M10 | M12 | M16 | M20 | M24 |
| Drilling Dia.(mm) | 12 | 14 | 18 | 24 | 28 | |
| Depth (mm) | 90 | 110 | 145 | 180 | 220 | |
| Damage Pulling force KN | Grade 5.8 Steel | 29 | 42.2 | 78.5 | 122.5 | 254.5 |
| Grade 8.8 Steel / A4 SS | 36.8 | 52.9 | 94.1 | 147.0 | 211.7 | |
| Damage Cutting force KN | Grade 5.8 Steel | 17.4 | 25.3 | 47.1 | 73.5 | 105.9 |
| Grade 8.8 Steel | `27.8 | 40.5 | 75.3 | 117.6 | 169.4 | |
| A4 SS | 24.4 | 35.4 | 65.9 | 102.9 | 105.9 | |
| Designed Pulling force KN | 12.0 | 17.02 | 30.6 | 52.4 | 75.2 | |
| Designed Cutting Force KN | Grade 5.8 Steel | 12.2 | 17.6 | 32.9 | 51.5 | 74.1 |
| Grade 8.8 Steel | 18.6 | 27.0 | 50.2 | 78.4 | 113.0 | |
| A4 SS | 13.0 | 19.0 | 35.3 | 55.2 | 56.9 | |
| Holes for each | 54 | 25 | 8 | 5 | 3 |
Anchor Load Capacity of rebar to C30 concrete (designed value KN)
| Rebar d(mm) | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | |
| Hole D(mm) | 14 | 16 | 18 | 22 | 25 | 28 | 30 | 32 | 36 | 38 | 40 | |
| Bar planting depth (mm) | 100 | 19.8 | ||||||||||
| 120 | 23.8 | 27.6 | ||||||||||
| 140 | 27.7 | 32.2 | 36.3 | |||||||||
| 160 | 31.7 | 36.8 | 41.5 | 45.8 | ||||||||
| 180 | 41.4 | 46.6 | 51.6 | 55 | ||||||||
| 200 | 46.0 | 51.8 | 57.3 | 61.1 | 62.8 | |||||||
| 220 | 57.0 | 63.1 | 67.2 | 69.1 | 71.5 | |||||||
| 240 | 62.2 | 68.9 | 73.3 | 75.4 | 78 | 79.2 | ||||||
| 260 | 74.6 | 79.3 | 81.7 | 84.5 | 85.8 | 96.1 | ||||||
| 280 | 80.4 | 85.4 | 88.0 | 91.0 | 92.4 | 102.9 | 107.4 | |||||
| 300 | 91.5 | 94.2 | 97.5 | 99 | 109.8 | 114.6 | 115.8 | |||||
| 320 | 97.6 | 100.5 | 103.9 | 105.6 | 116.6 | 121.8 | 123 | |||||
| 340 | 103.7 | 106.8 | 110.4 | 112.2 | 123.5 | 128.9 | 130 | |||||
| 360 | 113.0 | 117.0 | 118.8 | 130.4 | 136.1 | 137.5 | ||||||
| 380 | 119.3 | 123.5 | 125.3 | 137.2 | 143.3 | 144.8 | ||||||
| 400 | 125.6 | 130 | 131.9 | 144.1 | 150.4 | 152 | ||||||
| 420 | 136.5 | 138.5 | 150.9 | 157.6 | 159.2 | |||||||
| 440 | 143 | 145.1 | 157.8 | 164.7 | 166.5 | |||||||
| 480 | 149.5 | 151.7 | 164.7 | 171.9 | 173.7 | |||||||
| 500 | 156 | 1583 | 171.5 | 179.1 | 181 | |||||||
| 550 | 164.9 | 188.7 | 197 | 199.1 | ||||||||
| 600 | 181.4 | 205.8 | 214.8 | 217.1 | ||||||||
| 650 | 197.9 | 223 | 232.7 | 235.2 | ||||||||
| 700 | 240.1 | 250.6 | 253.2 | |||||||||
| 750 | 257.3 | 268.5 | 271.5 | |||||||||
| 800 | 286.4 | 289.6 | ||||||||||
| 850 | 307.7 | |||||||||||
| anchoring length (mm) | 147 | 149 | 178 | 210 | 250 | 300 | 351 | 446 | 538 | 592 | 666 | |
| steel yield (mm) | 23.6 | 33.9 | 46.2 | 60.3 | 76.3 | 94.2 | 114 | 147.2 | 184.6 | 212.1 | 241.2 | |
Actual Tensile Strength (KN)
Grade II rebar fy=310 N/mm (designed), fy=310 N/mm (standard)
Concrete: C30
| Rebar d(mm) | 10 | 12 | 14 | 16 | 18 | 20 | 22 | 25 | 28 | 32 | |
| Hole D(mm) | 14 | 16 | 18 | 22 | 25 | 28 | 30 | 32 | 36 | 40 | |
| Bar planting depth (mm) | 100 | 30.3 | |||||||||
| 120 | 36.7 | 38.5 | |||||||||
| 140 | 42.2 | 47.5 | 53.1 | ||||||||
| 160 | 58.8 | 62.6 | 68.9 | ||||||||
| 180 | 63.5 | 73.3 | 80.4 | 90.1 | |||||||
| 200 | 68.5 | 80.7 | 95.2 | 106.7 | 120.7 | ||||||
| 240 | 89.5 | 102.5 | 122.6 | 137.6 | 140.7 | ||||||
| 260 | 118.7 | 137.6 | 152.4 | 166.8 | 168.5 | ||||||
| 280 | 149.7 | 168.7 | 180.2 | 192.7 | 200.2 | ||||||
| 300 | 183.5 | 200.7 | 218.5 | 231.7 | |||||||
| 280 | 210.6 | 241.7 | 260.5 | 250.5 | |||||||
| 300 | 220.9 | 265.5 | 298.8 | 280.7 | |||||||
| 340 | 277.7 | 327.7 | 330.2 | ||||||||
| 380 | 285.6 | 356.7 | 370.7 | ||||||||
| 420 | 342.2 | ||||||||||
| 460 | 400.1 | ||||||||||
| 500 | 427.7 | ||||||||||
| 540 | 447.2 | ||||||||||
| 580 | 466.5 | ||||||||||
| steel yield depth (mm) | 90 | 121 | 142 | 185 | 211 | 250 | 280 | 357 | 405 | 501 | |
Processing Method
1 Tools
- Electric hammer
- Hole cleaning brush
- Air compressor
- Glue gun
2 Attention
- Drill size as per requested hole dia. and depth
- Clean the hole completely
- Inject glue from the bottom of the hole and pull out the gun slowly.
- After planting the bar, let the gel harden in still
Processing Flow
Drilling: As per technical data
Cleaning: using pump or compressed air and brush to clean the hole completely.
Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the bottom of the hole, to fill 1/2 to 2/3 depth of the hole.
Bar planting: spin slowly the bar or screw into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.
Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it hardened completely.
Curing time:
| Operation and Harden time | |||||
| Temperarure ℃ | -5 | 0 | 10 | 20 | ≥30 |
| Operation time (min) | 60 | 45 | 30 | 25 | 20 |
| Harden time (h) | 72 | 48 | 24 | 12 | 6 |
Consumption Chart (holes per cartridge)
| Anchor Rod dia. | M10 | M12 | M16 | M20 | M24 |
| Drilling Dia.(mm) | 12 | 14 | 18 | 24 | 28 |
| Depth (mm) | 90 | 110 | 145 | 180 | 220 |
| Each usage | 8ml | 13ml | 28ml | 62ml | 103ml |
| 360ml | 45 | 27 | |||
| 390ml | 48 | 30 | 14 | 6 | 3 |
| 585ml | 73 | 45 | 20 | 9 | 5 |
| 650ml | 81 | 50 | 23 | 10 | 6 |
Packaging:
- One cartridge with one mixer in carton
- 12pcs/20pcs/30pcs per carton.
- Xinchor label or your own label.
- EXP Date on the top of cartridge.
- Customized Packing.
| Item No. | Mixing | Standard Pack/Set | Pcs/Ctn | Ctn Size (cm) | Ctn/Pallet | Pallets/ 20'FCL | Pallets/ 40'FCL |
| FixingChor 136 | 5:1 | 360ml+ 1mixer | 20 | 27x27x27 | 60 | 10 | 20 |
| FixingChor 139 | 3:1 | 390ml+ 1mixer | 20 | 40x26x27 | 50 | 10 | 20 |
| FixingChor 158 | 3:1 | 585ml + 1mixer | 12 | 29x21.5x30 | 64 | 10 | 20 |
| FixingChor 140 | 1:1 | 400ml+ 1mixer | 30 | 49×30×26 | 40 | 10 | 20 |
| FixingChor 165 | 1:1 | 650ml+ 1mixer | 10 | 31.5×21×26 | 70 | 10 | 20 |
| FixingChor 142 | 2:1 | 420ml + 1mixer | 20 | 46x22x23 | 40 | 10 | 20 |
Our main product series:
-- Carbon fiber reinforcement system,
XQ-XW carbon fiber epoxy adhesive
XQ-XB concrete surface leveling epoxy adhesive
XQ-CFC carbon fiber fabric 12K unidirectional 200gsm-600gsm
-- Chemical Anchor series
Pure Epoxy Adhesive 360ml (5:1) 390ml(3:1) 585ml (3:1)
-- Steel bonding reinforcement system
XQ-JGN structural epoxy adhesive
XQ-GZ Grouting epoxy adhesive
XQ-FB edge sealing adhesive
-- Concrete repair system
XQ-GF crack grouting adhesive
XQ-FF crack sealing adhesive
Multiple Purpose Strong Rebar Adhesive Syringes Non Shrinkage High Expansion
Inquiry Cart
0