Hybrid Rebar Epoxy Adhesive No Hole Cleaning Required High Performance Reliable

3:1 Pure Epoxy Injectable Mortar, Injectable Anchor Adhesive, Rebar Anchoring

Chemical anchor adhesive, epoxy injection mortar, Chemical fixing glue,

Chemical anchoring system used for anchoring and rebar connections in concrete.

Strong, Versatile Epoxy Anchor Adhesives For Threaded Rod, Rebar

Item #: FixingChor158

Capacity: 585ml

Materials: Epoxy

Mixing Ratio: 3:1

Product Description:

3:1 Pure Epoxy Injectable Mortar, Injectable Anchor Adhesive, Rebar Anchoring

with approvals for rebar connections and heavy-duty anchoring
Base material condition: Dry, Wet

Base materials: Concrete (cracked and uncracked), Masonry wall

Application Range

Fixing of handrails, balustrades and supports

Fixing of railings

For structural work:

Fixing of window and door frames

Rebar / steel reinforcement anchoring in new and refurbishment works.

Threaded rods

Bolts and special fastening systems

Mechanical and electrical services installation

Anchoring of supports for ducting and equipment.

Metal Work, carpentry

Fixing of the following substrates:

Suitable for

Non-cracked concrete

Reinforcement bars

Concrete

Hard natural and reconstituted stone

Solid rock and masonry

For fixing of:

Steel constructions

Staircases

Consoles

Machines

High-racks

Wooden constructions

Reinforcement bars

Technical Parameter:

1. Basic parameters

1) Appearence

Part A (main): white cream

Part B (hardener): red cream / grey cream

2) Mixed Viscosity: 18-22Pa.s

3) Hardened density: 1.50±0.10g/cm³

4) Mixing ratio (Volume ratio): 390ml(3:1)

5) Shelf time: 24 months

2 Main Performance

3 Technical Data

Anchoring Adhesive used with thread rod

Processing Method

1 Tools

• Electrical hammer
• Air compressor
• Glue dispenser
• Hole cleaning brush

2 Attention

• Drill as per requested hole dia. and depth
• Clean the hole completely
• Inject from the bottom of the hole and pull out the gun slowly.
• After planting the bar, let the gel harden in still.

• Processing Flow

Drilling: As per technical data sheet

Cleaning: using air pump or compressed air and brush to clean the holes completely.

Assembling and Injection: Mount the static mixer onto the bottle, push out some incomplete mixed gel at the front part,then inject from the bottom of the hole, to fill 1/2 to 2/3 depth of the hole.

Bar planting: spin slowly the rebar or thread rods into the hole, adjust up and down for several times to make the gel average, but don’t touch it during hardening time.

Curing and Maintenance: According to the temperature of the base materials, give enough time to harden and start to load mounting until it hardened completely.

Curing time:

Consumption Chart (holes per cartridge)

Our Product Lines:

- Carbon Fiber Reinforcement System: XQ-CFC 300gsm, 200gsm fabric and adhesives XQ-XW

- Steel Bonding System: XQ-GZ Epoxy grouting adhesives, XQ-JGN Plate bonding Adhesives

- Crack Repairing System: XQ-GF Crack grouting adhesives, XQ-FF crack seal adhesives

- Chemical Anchoring 390ml(3:1), 585ml(3:1), 650ml(1:1),

Our History:

15 years from 2000, ISO9001 approved, 40 employees, 5000m2 plant

Our Quality

All passed China National Standard lab testing, and be similar to CE and other countries standards

Our main product series:

-- Chemical Anchor series

Pure Epoxy Adhesive 360ml (5:1) 390ml(3:1) 585ml (3:1)

-- Carbon fiber reinforcement system,

XQ-XW carbon fiber epoxy adhesive

XQ-XB concrete surface leveling epoxy adhesive

XQ-CFC carbon fiber fabric 12K unidirectional 200gsm-600gsm

-- Concrete repair system

XQ-GF crack grouting adhesive

XQ-FF crack sealing adhesive

-- Steel bonding reinforcement system

XQ-JGN structural epoxy adhesive

XQ-GZ Grouting epoxy adhesive

XQ-FB edge sealing adhesive

Established in 2005, Zhejiang Xinchor Technology Co., Ltd. Focuses on research, development, production and marketing for building reinforcement materials and chemical anchoring adhesive.

Our Headquarter and marketing center located in West Lake Technological Park in Hangzhou, only 2 hours driving from Shanghai Pudong Airport, as well as we have sales branches throughout China, we passed ISO9001-2008 certificate in 2010.

As the earliest reinforcement material providers, we have our products wide range applied to high-speed railway, nuclear power station, bridge, tunnel, subway, municipal and civil buildings, and maintain a long-term cooperative relationship with a number of well-known construction companies. As a professional manufacturer of reinforcement materials, with company spirit of "quality first, integrity management" purposes, we can provide good quality products for building and industry at home and abroad.

You are welcome to contact us, we would be delighted to be of service, providing advice and professional building reinforcement solutions.