FFP2 Disposable Respirator Mask Polypropylene Outer Layer Material Single Use

FFP2 Disposable Respirator Mask Polypropylene Outer Layer Material Single Use

1 . Descriptions

FFP2 Carbon Cup Mask use latex-free elastic strap , soft nose liner , softer and fit the face,adjustable aluminum nose clip will make wearing more sealless leakage .Easy-breathing valve can make breathing more smooth . Can be used on Cutting and Casting of Metals; Disposal of Toxic Waste; Iron and Steel Industry;Laboratory and Disease Control; Manufacture of Batteries; Mining; Pharmaceutical industry and so on.

2. Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.

3 . Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

4 . Recommended applications include:

• Cutting and Casting of Metals
• Disposal of Toxic Waste
• Iron and Steel Industry
• Laboratory and Disease Control
• Manufacture of Batteries

5 . Advantages

• Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibres.
• Embossed fringe seal avoids fluffy open layer around the edges. Latex-Free synthetic rubber headstrap.
• Contour design ensures the compatibility of glasses/goggles and reduces fogging.
• Soft nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
• Light wear and comfortable. Contour fit.Easy breathing/Speaking. Clear vision. Free maintenance (disposable item).
• The ISO 9001 / ISO 14001 certified production guarantees the reliability / regularity of the production and the control of the environmental impact.

6 . More pictures

Beijing Global Dowin Technology Co.,Ltd., established in 1999,is the comprehensive high-tech enterprise of specializing in Research and Development, Manufacturing, Sales and Service for Intelligent Smart Care Products.

Our group are professional in making Non-woven products, such as face masks, caps, coveralls etc. widely used in Food handing; Scientific research; medical health; chemical engineering; Electronics industry etc. fields. By virtue of all staff's diligent contribution to the group, we are successfully bringing our products to over 60 countries and areas, mainly to Europe, Australia, South America etc.