High Strength Cold Roll Steel Sheets Corrosion Resistance Martensitic Durable
Brand Name:JIN LAI
Certification:ISO
Model Number:410
Minimum Order Quantity:3 tons
Delivery Time:ship within 10 days after received the advance
Payment Terms:T/T, Western Union, L/C
Contact Now
Add to Cart
Active Member
Location:
Wuxi Jiangsu China
Address:
NO.21 Dongting Road,Xishan District,Wuxi ,Jiangsu,China
Supplier`s last login times:
within 41 hours
Product Details
Company Profile
Product Details
Decorative 410 Stainless Steel Metal Plate For Commercial Kitchen Walls
| 410 Chemical composition: | ||||||
| C | Si | Mn | Cr | Ni | S | P |
| 0.15 | ≤1.0 | ≤1.0 | 11.5~13.5 | ≤0.03 | ≤0.04 | |
| mechanical properties: | ||||||
| Tensile strength σb (MPa) | Conditions yield strength 0.2 sigma (MPa) | Elongation % (min) | Hardness | |||
| 260 | 470 | 30 | ≤210HV | |||
410 stainless steel is produced according to the American ASTM standard stainless steel brand, equivalent to China's 1Cr13 stainless steel, S41000 (AISI, ASTM).Carbon 0.15%, chromium 13%,410 stainless steel: good corrosion resistance, machinability, general purpose edge, valve.Heat treatment of 410 stainless steel: solution treatment (℃) 800-900 slow cooling or 750 fast cooling.
Description:
- Grade : 410S / 410
- Thickness : 0.3-3mm
- Tolerance : +/- 0.02mm
- Width: 1000mm 1219mm 1220mm 1240mm 1500mm or as customized
- Length : 2000mm 2400mm 2440mm 3000mm 2500mm or as customized
- Mill : BAOSTEEL
- Trade term :FOB, CFR, CIF, CNF , EXW
Cold rolled: Hot rolled coil is used as raw material, and the oxide skin is removed by pickling. The product is rolled coil. The cold work hardening caused by continuous cold deformation makes the strength, hardness and toughness and plasticity of rolled coil increase, so the stamping performance will deteriorate and can only be used for parts with simple deformation. Rolled coil can be used as raw material for hot galvanizing plant because annealing lines are set up in hot galvanizing units. The weight of rolled coil is generally 6-13.5 tons. The hot rolled pickling coil is rolled continuously at room temperature. The inner diameter is 610 mm.
Cold Rolled Stainless Steel Sheet / Plate:
a. Stretch good, toughness, but the price is more expensive;
b. Cold rolling processing surface without oxide skin, good
quality;
c. Cold rolling is generally used in the production of strip, the
rolling speed is high;
d. Cold rolling than the thickness of the high precision.
Mechanical properties, surface and so on in the hot rolling;
e. Cold-rolled steel coil due to a certain degree of work
hardening, low toughness, but can achieve better yield ratio, used
for cold-formed spring and other parts;
f. Cold coil yield point closer to the tensile strength, so the use
of risk in the process of no predictability, when the load exceeds
the allowable load prone to accidents
g. The surface of the cold rolled steel coil without plating is
gray.
h. Cold rolled steel plate surface smoothness is higher than the
hot rolled steel coil.
| Cold rolled plate | |||||||
|---|---|---|---|---|---|---|---|
| Specification (Thick) | Big Deviation | Normal Deviation | Small Deviation | No Deviation | |||
| 0.4mm | 0.3mm-0.32mm | 0.33mm-0.37mm | 0.37mm-0.39mm | no less than 0.39mm | |||
| 0.5mm | 0.4mm-0.42mm | 0.43mm-0.47mm | 0.47mm-0.49mm | no less than 0.49mm | |||
| 0.6mm | 0.5mm-0.52mm | 0.53mm-0.56mm | 0.57mm-0.59mm | no less than 0.59mm | |||
| 0.7mm | 0.6mm-0.62mm | 0.63mm-0.67mm | 0.67mm-0.69mm | no less than 0.69mm | |||
| 0.8mm | 0.7mm-0.72mm | 0.73mm-0.77mm | 0.74mm-0.79mm | no less than 0.79mm | |||
| 0.9mm | 0.8mm-0.82mm | 0.83mm-0.87mm | 0.87mm-0.89mm | no less than 0.89mm | |||
| 1.0mm | 0.89mm-0.9mm | 0.91mm-0.94mm | 0.94mm-0.99mm | no less than 0.99mm | |||
| 1.2mm | 1.02mm-1.08mm | 1.09mm-1.15mm | 1.16mm-1.18mm | no less than 1.18mm | |||
| 1.5mm | 1.32mm-1.38mm | 1.39mm-1.45mm | 1.46mm-1.48mm | no less than 1.48mm | |||
| 2.0mm | 1.72mm-1.79mm | 1.8mm-1.86mm | 1.87mm-1.9mm | no less than 1.9mm | |||
| 2.5mm | 2.23mm-2.36mm | 2.32mm-2.42mm | 2.42mm-2.47mm | no less than 2.48mm | |||
| 3.0mm | 2.7mm-2.77mm | 2.78mm-2.85mm | 2.85mm-2.9mm | no less than 2.9mm | |||
Factory and Machinery Equipment :
We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
Different kinds of finish sevices
Process machine
High Strength Cold Roll Steel Sheets Corrosion Resistance Martensitic Durable
Inquiry Cart
0