

Add to Cart
DC 28L compressor refrigerator car refrigerator cooler with LCD touch screen
Our company brief introduction
Our company is a professional manufacturer of DC inverted frequency
compressor, solar refrigerator & freezer, car refrigerator, and
so on. Our company integrates with designing, production and
trading. With the principle of high start point, high standards,
and supper quality, the company has sold its product and been
well-known in domestic and oversea market.
Product certificates introduction
Our products have passed LVD / EMC / CE / ROHS / REACH certification
Competitive advantages of our products
1. DC12V/24V automatic identification , AC/DC operated
2. Can set the temperature at a wide range from 10ºC to -20ºC
3. Perfect for tropical climate, can even refrigerate in blistering
hot temperature up to 40ºC.
4. Digital temperature pre-setting and LCD display with failure
prediction show.
5. Automatic power cut off at 10V to protect the battery.
6. Anti-vibration design for harsh condition.
7. Used for camping & outdoor, car, motor homes, RV, caravan,
truck, automotive, boat, marine, home.
8. Can still work normally under the 30 angle of inclination
Operations for LCD touch screen
--ON/OFF button: Connect the refrigerator to the power supply and press the ON/OFF button once, and the display will be on to show the environmental temperature. It is recommended to switch on the cooling after the 3-minute delay protection. Press the ON/OFF button again, the refrigerator will be off.
--After you press ON/OFF button, you can set the temperature range from -25℃ to 20℃. Short press "+" and "-" button, or long press "+" and "-" button to adjust the temperature.
-- Long press SET button for 3 seconds and enter advanced parameter mode:
(1) Voltage protection mode:
The machine has three battery protection functions, which protect the normal operation of the refrigerator and protect the battery of the vehicle. The three functions are H3 (high), H2 (medium) and H1 (low). Short press "+" or "-" button to choose the function. The function is set at "H2" (medium) protection when the refrigerator is finished at the factory.
It is recommended to set the battery protection at H2 (medium) when it is used in the car.
It is recommended to set the battery protection at H2 (medium) or H1 (low) if it is external battery or backup battery.
Because of the difference in voltage output from different vehicle power supply output, if there is voltage protection (display screen shows F1), the battery function could be reduced to a lower one (H3 is adjusted to H2 or H1).
If to use the refrigerator after the car engine runs out of fire, please adjust the battery protection at H3 (high). Otherwise, there may be a situation where the battery power of the car is too much consumed to start the vehicle.
The three voltage parameters as below:
H3 (high): 10.9V (stop) --12.2V (start voltage)
23.8V (stop) --25.2V (start voltage)
H2 (medium): 9.7V (stop) --11.0V (start voltage)
21.5V (stop) --22.9V (start voltage)
H1 (low): 9.6V (stop) --10.9V (start voltage)
21.3V (stop) --22.7V (start voltage)
Detailed Specification table
Product Name | DC Car Refrigerator (with trolley handle, LCD touch screen) | |
Model | ZM-28D | |
Climate Type | T ,ST,N,SN | |
Volume | 28L | |
Refrigerant | R134a | |
Voltage | DC12v/24v | |
Power | 45W | |
Current | 3.7A/1.85A | |
Temperature(℃) as low as | -18 | |
Insulation Materials | C5H10/C-Pentane | |
N.W/G.W(Kgs) | 14KGS/16KGS | |
Product Size | 400*390*510(mm) | |
Carton Size | 430*450*560(mm) | |
Load Quantity | 20Ft | 40HQ |
260PCS | 540PCS |
Parameters Table
Model | ZM-18A/D | ZM-25D | ZM-28A/D |
Capacity | 18L | 25L | 28L |
Environment type | T/ST/N/SN | T/ST/N/SN | T/ST/N/SN |
Safety level | III | III | III |
Voltage | 12V/24V | 12V/24V | 12V/24V |
Rated current | 3.35/1.7A | 3.75/1.875A | 3.75/1.875A |
Rated power | 40W | 45W | 45W |
Refrigerant | R134a/35g | R134a/35g | R134a/35g |
Available with a trolley handle for easy carry
Q&A
Q1. How do you pack your products?
A: We pack it with EPS and 5-layer carton box .
Q2. Can we print our logo on the product and carton box?
A: If you have legally registered patent, we can pack the goods in
your branded boxes after getting your authorization letters.
Q3. What is your payment term?
A: T/T 40% as deposit, and 70% before delivery. We'll show you the
photos of the products and packages before you pay the balance.
Q4. What is your price term?
A: FOB, CFR, CIF ETC
Q5. What’s your lead time for production?
A: Generally, it takes about 25 to 30 days after receiving your
advance payment.
The specific delivery time depends on the items and the quantity of
your order.
Q6. Can you produce based on our sample?
A: Yes, we can produce by your samples or technical drawings. We
can open the molds just for you.
Q7. What is your sample policy?
A: We will charge the sample if you want to get a sample and check
the quality before you place an official order.
And the freight by Fedex or DHL is on your side
How to contact us