250KVA SDEC Diesel Generator

Brand Name:BOSSPOWER
Certification:CE
Model Number:BS-SD250
Minimum Order Quantity:1 Set
Delivery Time:30 days
Payment Terms:L/C , T/T
Contact Now

Add to Cart

Active Member
Location: Fuzhou Fujian China
Address: No. 10, Xiahe Road, Minhou Economic and Technological Development Zone, Minhou County, Fuzhou, Fujian, China
Supplier`s last login times: within 4 hours
Product Details Company Profile
Product Details

Full Flow Fuel Filter SDEC Diesel Generator 50HZ 1500rpm 250KVA Stable Running


50HZ 1500rpm 200kw 250kVA SDEC Shangchai Engine Diesel Electric Silent Diesel Generator


PRODUCT DESCRIPTION
Frequency : 50HZ ; Rotating speed : 1500Rpm
ModelPower(KW)Capacity(KVA)Rated current(A)Engine ModelCopy Stamford Type
BS-SD635062.590.2SC4H95D2BS224E
BS-SD856885122.7SC4H115D2BS224G
BS-SD12096120173.2SC4H160D2BS274D
BS-SD135108135194.9SC4H180D2BS274E
BS-SD160128160230.9SC7H230D2BS274F
BS-SD180144180259.8SC7H250D2BS274G
BS-SD200160200288.7SC8D280D2BS274H
BS-SD250200250360.9SC9D340D2BS274K
BS-SD313250313451.1G128ZLD11BS314D
BS-SD350280350505.2SC12E460D2BS314E
BS-SD375300375541.3SC15G500D2BS314FS
BS-SD438350438631.512V135BZLDBS354C
BS-SD500400500721.712V135BZLD2BS354D
BS-SD563450563811.912V135BZLD1BS354ES
BS-SD625500625902.1SC27G830D2BS354FS
BS-SD7506007501082.6SC33W990D2BS404B
BS-SD8006408001154.712V138CZLDBS404C
BS-SD9007209001299.112V138DZLDBS404D

More specific parameters to choose.


Genset ModelBS-SD250
Prime Power (kw/kva)200 / 250Standby Power(kw/kva)220 / 275
Voltage (v)400Rated Speed (rpm)1500
Frequency (Hz)50Rated Current (A)360
Connection:3 phasePower Factor:0.8
Engine Model:SC9D340D2Alternator Model:BS274K
Net Weight (kgs)-Silent2750Dimensions (mm)-Silent

3400x1300x1800

Standard Configuration:

* Engine:SDEC SC9D340D2

* Cooling Fan with fan guard and front guard

* Alternator: Single bearing, IP23, H class

* 24V Charger

* Shock Absorber

* Dry Air Filter. Dual Fuel Filter. Engine Oil Filter , Coolant Filter.

* MCCB Circuit Breaker

* Standard Control Panel; ATS for optional

* 2x12V Start Battery with connecting cable

* Storage Battery and battery line, Exhaust pipe,Corrugated pipe for anti-vibration, Cone Tube, Flange, Muffler

* Soundproof Enclosure/Canopy for optional

* Documents


Quality Assurance:
  • Factory Inspection, the test items before delivery are mainly as follows:
  • Each genset shall be put into commission more than 4 hours totally. They are tested on idle load, fully load and 10% overload;
  • The noise level is tested
  • All of the meters on the control panel shall be tested
  • The appearance of the genset and all of the label and nameplate shall be checked
  • Warranty

12 months or 1000 running hours from shipment date. If the quality problem arise during the warranty period, and verified the problem is caused by our genset-body instead of external or natural reasons. (Refer to all kinds of natural disaster, shipping, loading, unloading, wrong-operation, etc), we will supply the relevant spare parts free of charge for maintenance; after the warranty period, we can supply the required spare parts for you under cost prices.


Engine Parameter:
Specifications

Engine Model

Engine Type


Combustion type

Cylinder Type

Number of cylinders

Bore × stroke

Displacement

Compression ratio

Firing order

Injection timing

Dry weight

Dimension (L×W×H)

Rotation

Fly wheel housing

Standby Power

SC9D340D2

In-line,4 strokes, water-cooled , 4 valves,

Turbo charged Air-to-air intercooled

Direct injection

Wet liner

6

114× 144mm

8.82 L

16.5 : 1

1-5-3-6-2-4

8.5°BTDC

Approx.840 kg

1578×778×1290 mm

SAE NO.2

SAE NO.11.5

250KW

Mechanism

Type

Number of valve

Valve lashes at cold


Overhead valve

Intake 2, exhaust 2 per cylinder

Intake 0.30mm

Exhaust 0.55mm

Valve Timing

Intake valve

Exhaust valve

Opening Close

29.5°BTDC 42.5°ABDC

69.5°BBDC 34.5°ATDC

Fuel Consumption

Power

25%

50%

75%

100%

110%

L/h(1500r/min)

14.7

27.3

40.8

54.1

59.6

Fuel System

Injection pump

Governor

Feed pump

Injection nozzle

Opening pressure

Fuel filter

Used fuel



Longkou in-line “P” type

Electric type

Mechanical type

Multi hole type

250 kg/cm2

Full flow, cartridge type

Diesel fuel oil


Lube System

Lub. Method

Oil pump

Oil filter

Oil pan capacity


Angularity limit


Lub. Oil


Fully forced pressure feed type

Gear type driven by crankshaft

Full flow, cartridge type

High level 25 liters

Low level 22 liters

Front down 25 deg.

Front up 35 deg.

Side to side 35 deg.

Refer to Operation Manual

Cooling system

Cooling method

Water capacity (engine only)

Lid Min. pressure

Water pump

Water pump Capacity

The maximum temp. of coolant in prime/ Standby power


Thermostat


Cooling fan



Fresh water forced circulation

12 liters

N/A

Centrifugal type driven by belt

200L/min (1500r/min)

N/A


Wax–pellet type

Opening temp. 82°C

Full open temp. 93°C

Blower type, plastic

762 mm diameter, 10 blades



Engineering Data

Heat rejection to coolant

Air flow

Exhaust gas flow

Exhaust gas temp.

Max. permissible restrictions

Intake system

Exhaust system

Max. permissible altitude



20.35kcal/sec(1500r/min)

18.6m3/min (1500r/min)

41m3/min(1500r/min)

600 °C

3 kPa initial

6 kPa final (need charge filter element)

6 kPa max.

2000 m


Alternator Parameter: Basic Information

The alternators meet the standards of:

GB755, BS5000, VDE00530, NEMAMG1-22,IED34-1,CSA22.2 and AS1350

Technical Data:

Manufacturer:

Phases:

Bearing numbers:

Power Factor:

Protection Class:

Altitude Condition:

Excitation:

Insulation class/Temp. rise class:

Tel. Influence Factor TIF:

Tel. Harmonic Factor THF:

Steady State Voltage Regulation:

Alternator Capacity:

Efficiency:

Copy Stamford BS274K

3

1

0.8

IP23

≤1000M

Brushless, self-excitation

H / H

<50

<2%

≤±1%

200KW

92.7%


PRODUCT ADVANTAGE


(1) The silent canopy we use cold-rolled sheet, all positions are stronger.

(2) Our spraying plastics all go through pre-treatment of pickling and phosphating,

so that the surface of the painting will not change color even if placed outside for five years.

(3) Canopy color painted by customer's requirement.

(4) Strict test including 50% load , 75% load , 100% load and 110% Load .

(5) Forklift mouth in base frame for easy loading and discharging.

(6) Logo made by customer's requirement if order quantity ≥10units or a full container.



FAQ

Q : Do you offer OEM service?
A : Yes
Q : What is your payment term?
A : 30% T/T in advance, the rest payment before shipment. Or irrevocable L/C.
Q : What is your lead time?
A : About 30 days after receiving deposit or original L/C.But if your order with some special design,

then the delivery time is longer.
Q : What certificates do you have?
A : We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP

for Nigeria,CIQ for Egypt, SASO for Saudi Arabia, etc
Q : What is your MOQ?
A : Above 1pc
Q : Which port do you often use when export?
A : Fuzhou Port , or as customer request.

China 250KVA SDEC Diesel Generator supplier

250KVA SDEC Diesel Generator

Inquiry Cart 0