Water Resistant Disposable Protective latex Gloves Individual Packing
Brand Name:OEM
Certification:CE / FDA
Model Number:OEM
Minimum Order Quantity:Negotiable
Delivery Time:3 work days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Active Member
Location:
Jinhua Zhejiang China
Address:
Room 203, Unit 2 ,Building 19th, 2nd Zone ,Kongcun, Jiangdong Street,Yiwu, Jinhua City ,Zhejiang Province
Supplier`s last login times:
within 24 hours
Product Details
Company Profile
Product Details
Cheapest Factory Prices Disposable Nitrile,latex, vinyl Surgical Gloves in China
| The requirements for medical-grade gloves are as follows | |
| 1:length | Measure with a ruler in mm, and align the glove naturally perpendicular from the edge of the glove to the zero degree of the ruler, perpendicular to the middle finger tip of the glove. |
2: thickness | Cuff: measure the upper lip of the roll 13+3mm at any of three different positions, take the average |
| Fingertip: cut from the middle fingertip down 13+3mm into four equal parts, and take the average of four parts. | |
| Finger seam: cut the finger seam between middle finger and index
finger, measure the thickest part on both sides and record the maximum value. | |
| 3 | The leftover side slices are required to be placed in the center of
the glove at a distance of 1cm from the edge of the windle, and the width of the parallel part of the cutter center is 6mm. When the tension is made, the upper and lower clamps are set at a distance of 40mm, and the test position is the center and 1cm above and below, and the average value is taken. |
| 4:Hanging water test | The water requirement is 1000+50ML, the height of gloves is 40mm,
the hoisting time is 3 minutes, and the water temperature is required to be 15-30° |
| 5:Visual Inspecting Test | Hole/scratch/tear/drop of oil/mixed number/bad side/insect/hair/serious deformation = unqualified product, not available for sale. |
| 6:Physical test frequency | Normally, the weight/length is measured once per hour, the
thickness is measured once for 4 hours, and the tension/elongation
is measured once for 2 hours. |
| 7:Standard for grade pinhole testing | Each time each line each side sampling 75, 0-1 pinholes for Best
quality grade. Main requirements: test all gloves on the production line, test and wear them every 2-3 hours, no less than 10 minutes each time, and make relevant records. |
Water Resistant Disposable Protective latex Gloves Individual Packing
Inquiry Cart
0