Product Details
SUS304 Stainless Steel Swing Turnstile Gate Support IC/ID Card
Features
- Lane and overtaking lights adopt red and green colors and red,
green and blue ambient lights in the aisle to form an overall light
effect, cooperate with traffic logic to implement traffic
instructions, and prompt information is straightforward and
concise;
- Sound and light alarms for illegal entry, reverse entry, etc.;
- The channel adopts 4 pairs of infrared anti-radiation and
anti-pinch protection;
- Adopt triple pedestrian protection to pass: infrared induction
anti-pinch; pass logic anti-pinch; return when blocked;
- The chassis panel provides a card and QR code installation area,
and reserves the face recognition installation position. Support
IC, ID, QR code, ID card, face recognition, etc., only authorized
personnel can pass;
- The power-off door panel automatically unlocks, which meets the
fire protection requirements; if the optional battery panel is
powered off, the gate will automatically open to allow people to
pass freely; provide a power-on self-check function;
Parameter
Model | DR.TD.6657M |
Material | 304 brushed stainless steel (Thickness:Cover1.2mm,Body:1.0mm) |
Swing Arm | Stainless Steel,Acrylic |
Lane Width | ≤1050mm |
Rated Power | 40W |
Working Temperature | -20 ℃ ~70℃ |
Input Power | AC220V,50/60HZ |
Motor | DC Brushless Motor |
Environment | Indoor/Outdoor |
Communication Interface | RS485,Dry Contact |
Humidity | ≤90%,No Condensation |
Anti-pinch | Infrared , Current Detection , Logic anti-pinch |
Power-Off Openning | Automatically unlock when power off; Power off the battery panel
and open the door (optional) |
Locking Method | Motor Reverse Clutch Lock |
Installation Instruction
- Prepare the tools for installing the equipment (percussion drill,
expansion screw, adjustable wrench, a set of Allen wrench,
screwdriver, electrical tape, wire cutter, multimeter, network
cable tester, etc.)
- Channel number composition, channel width, working method, and then
make overall planning at the determined installation location;
- Determine the location of the installation equipment and arrange
the equipment in order: A1-A2-A3 is the entrance side, and the
B1-B2-B3 exit is the other side. After determining the channel
installation location, excavate on the side of the channel A Put
two PVC pipes with appropriate pipe diameters into the wiring
trough, and pass the AC220V power cord (RVV3*2.0), network cable,
24V power cord (RVV2*0.5), CAN communication line (RVVP2*0.3)
through each channel Into the PVC line pipe.
- Note: The AC220V and DC24V power cords are passed through the PVC
pipe separately, and the rest of the network cables and CAN
communication lines are passed through another PVC pipe; a single
core requires one network cable, and a dual core requires two
network cables (1, power cord 2, CAN Communication line 24V power
line 3, network cable)
- Mark the expansion screw installation holes at the bottom of the
turnstile, drill the M14 hole with an impact drill, and pre-embed
the M12 expansion screw.
Dimenssion
Application
FAQ
Q1: Do you have English version system?
A: Yes, we can provide English version system. Also you can use
your own system as well.
Q2: Does the equipement include control board?
A: Yes, it is with control board. But if need our system to
management, need to order extra channel management control board.
Q3: Can we connect your access control system with our system?
A: Yes, we provide SDK and Software development service with
connection port.
Q4: How can we install the turnstiles/barrier gates? Is it easy?
A:Yes, it's easy to install, we have done most of the jobs before
sending our products. You just need fix the gates with screws, and
connect power supply cables and internet cables.Also we provide one
sheet of specific manual specification in the package.
Q5: What is your company’s strength?
A: We are the top 3 manufacturer in turnstile field in China. And
we are listed company with famous brand in China. We have more than
400 employees, a R&D group with 160 people, 15-person
customized team, 18 offices, 9 agents and more than 20 distributors
all around China.
Q6: How do you do after-sale service?
A: We provide life-time technology support on line, by emails,
video, phone etc. We have engineer speaking English, convenient to
communicate with you directly.
Q7:How about the lead time?
Normally we have raw material in stock for the hot sale models of
standard products. Regular products need 5-7 working days. The
customized products need 15-20 working days.
Q8: How many years of warranty?
A: We provide 1 year warranty for our products.
Company Profile
Shenzhen DOOR Intelligent Control Technology Co.,Ltd. (Stock Code
832966) is a high-tech enterprise in the feld of
intelligent access control based on cloud computing, which located
in Longhua District, Shenzhen. DOOR has more than
400 employees, including 200 R&D and technical personnel. Door
has already achieved National High-Tech Enterprise
Certifcation, Double Soft Enterprise Certifcation, ISO9000
International Quality System Certifcation and CE Certifcation.
Meantime, the company has obtained over 60 invention patents and
national software copyright with registered capital of CNY 100.06 million.
Reorganised in 2011, DOOR adheres to independent innovation and
standardized production management, and provides large platforms and applications for multiple industries, such as
DOOR-Netcom service system, intelligent parking lot management
system, intelligent pedestrian turnstile system, intelligent access control
system, intelligent EV charging management system, and intelligent attendance visitor system. At the CPSE in October 2013, DOOR
launched the first parking lot cloud platform in China. DOOR Cloud Platform implements layer-by-layer openness, resource sharing, and
provides a complete and convenient application and development environment for all types of customers. More than 300 large-scale
operators and innovative companies cooperate with DOOR.