

Add to Cart
Infrared Body Temperature Monitoring UV Light Disinfection Robot / Portable Disinfection Robot
Product Description
The anti-virus robot for COVID-19, using mobile robot as carrier,
equipped with ultraviolet anti-virus lamp and human body
temperature camera, performs autonomous mobile multi-point
anti-virus for environmental surface and air. It takes only 150
minutes to kill 1,000 square meters.
The anti-virus robot is suitable for indoor public places or
high-risk environments. It can move autonomously and be killed by
no one. It can work in public areas such as shopping malls,
offices, and office buildings to reduce the insecurity of manual
killing. Data, history is controllable.Thermal defect recognition
and other functions.
Features
Ultraviolet indoor mobile multi-point disinfection Configure infrared body temperature monitoring, body temperature detection during the day, and disinfection at night Industry's largest power efficiency killing, cumulative UV intensity up to 270W / CM2 Laser SLAM algorithm completes the construction and positioning of the global environment map Fully mature cognitive and positioning navigation capabilities Ultraviolet killing robot is suitable for shopping malls, stations, offices, production sites, etc. Robot conforms to [National Standard] GBT 30030-2013 Automatic Guided Vehicle (AGV) UV disinfection conforms to [National Standard] GB 19258-2012 UV germicidal lamp |
Parameters
Category | Item | Parameter |
Material of body | Material of body | Cold rolled steel + plastic |
Size | Size | 580x500x1200mm |
Weight | Weight (including battery) | 50KG |
Ambient temperature | 5 to 40 degrees | |
Ambient humidity | Relative humidity 5 to 95% (no condensation) | |
Running environment | Indoor use only, no excessive dust, no corrosive gas | |
Environmental conditions | Protection level | IP20 |
Cleanliness grade | Class100 | |
Antiskid coefficient of ground | >0.5 | |
Ground requirement | Horizontal ground for concrete pouring (without water, oil or dust) | |
Minimum flatness of ground | Ff25 (* AC1117 standard) | |
Vertical obstacle surmounting ability | 10mm | |
Ability to cross gullies | ±20mm | |
Ground conditions | Climbing ability | 5° |
Path selection | Secure scanning lidar based on environment mapping independent path selection | |
Navigation | Navigation system | Provide large-scale lidar mapping, lidar positioning, lidar path planning, lidar navigation functions, including obstacle avoidance and recovery control. |
Rendering of environmental map | Scanning with Slam (positioning and mapping ad the same time) | |
Navigation mode | Laser landmark navigation | |
Running speed | Maximum speed | 1 m / S (theoretical maximum speed) |
Maximum rotational speed | 180% | |
Mobility performance | Stopping precision | Position accuracy1 cm, angle accuracy:+ 2° |
Texture of material | Polyurethane | |
Driving wheel | Size | Diameter 150 * 35mm |
Battery | Industrial grade lithium iron phosphate battery, high stability, metal shell safety protection, earthquake resistance, accidental strong impact damage, no open fire | |
Capacity | 0.75kwh | |
Running time | 6H | |
Battery | Charging time | <2.5H |
Battery life | Cycle life < 1500 times, keep 80% capacity after 1500 times | |
Charging mode | Auto / manual | |
Power output | 12V 5A / 24V 5A | |
protection system | Power protection, temperature protection |
Category | Item | Parameter |
Equipment | Wireless signa |