Product Details
EN 149:2001 + A1:2009 FFP2V Foldable Mask ,Fold Flat Mask , With CE
Certificate Approved
1 . Descriptions
- 【High filtration】- High Technology Filters Almost 98% Of Airborne
Particles Dust, Germs, Seasonal Allergies, Smoke, Car Exhausted
Gas, PM 2.5 Pollution Ash.
- 【Designed for comfortable on-the-job protection】- Disposable Mask
Is Lightweight, Humidity-resistant, Latex-free, Adjustable Metal
Nose Strip And Comfortable Elastic Headband.
- 【Available 24/7】- Our Mask Can Be Used All Year In Any Weather
Which Keeps You Safe From Fog, Smog, Dust, Germs, Bacteria,
Viruses, Air Pollution, Allergens, And Humidity Thus Keeping You
Healthy And Safe From Many Diseases.
- 【Size】- One Size Fits Most; Universal Contoured Design Provides A
Snug Fit To Most Facial Profiles.
- 【Don't Worry】- If You Have Any Questions Or Queries, Please Do Not
Hesitate To Contact Us. We Will Offer You A Satisfactory Solution.
FFP2V Foldable Mask :Fold flat design, 12 pieces per pack,
individually wrapped for health care.Fold flat design, improved
packaging;Compact space saving packagingDual extra wide straps;
Mask has hypoallergenic elastic for close fitComfort fit -
adjustable nose rim provides close fit.Filter: non woven filters
charged electrostatically to catch particlesMasks are individually
packaged
2 . Certification
This product has been tested according to the following European
Standard:
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering
half masks to protect against particles. Requirements, testing,
marking.It complies with European Regulation (EU) 2016/425 on
Personal Protective Equipment (PPE).Category III.EU type
examination certificate (module B) issued by BSI , notified body
CE0086.
- The PPE is subject to the conformity assessment procedure based on
internal production control plus supervised product checks at
random intervals set out in Annex VII under surveillance of BSI ,
notified body CE0086.
3 . Directions for use
- The mask is for single use only.
- The mask should not be removed from its packaging until its
required for use.
- Use the respirator in accordance with applicable health and safety
regulations.
- Fit the respirator and check leak-tightness before entering the
contaminated area.
- Wear the respirator for the whole duration of exposure to
contaminants.It should not be used for more than 8 hours
continuously and should be discarded after use.
- Transport and stockage of unused masks should be such that the
product is not stored in direct sunlight and in frost free
conditions,not in contact with solvents and cannot be damaged by
physical contact with hard surfaces/items.
- As required by European Health and Safety requirements,the user is
advised that when the mask is in contact with the wearer’s skin,it
may cause allergic reaction to susceptible individuals.If this is
the case,leave the hazard area,remove the mask and seek doctor’s
advice.
4 . Discard and replace the mask if:
The mask is removed whilst in the contaminated area.
Clogging of the respirator causes breathing difficulties.
The mask becomes damaged.
For respirators protecting against vapours,the smell of vapours
present becomes derectable.
When the respirator is not used,the sliding elastic bands allow to
hang up the mask around the neck
5 . More pictures
Company Profile
Guangzhou Lumileds Lighting Co., Ltd. is a leading supplier of LED
auto lighting products. But during Epidemic period in China, our
government supports a lot of factory to produce disposable
non-woven products, and non-contact thermometer. Our factory was
founded in 2012 and it’s professional in export and import
manufacturer in China.
Our factory located in zhongshan city, which is the most famous
place of lighting in China, it’s only 1 and half hours’ drive away
from guangzhou port or shenzhen port.
Although we are new in mask and thermometer products, but we have
the most complete supply chain system and richest production
experience of non-woven products in China. For the thermometer main
technology--infrared probe, we study by our self. From raw material
to package and production to transportation, Guangzhou Lumields
becomes one of the most famous leading supplier of non-woven
products industry in Guangdong Province. Guangzhou Lumileds
lighting is a large-scale integrated non-woven product enterprise,
which focuses on manufacturing, R&D, and marketing. Our main
products including disposable non-woven fabric, such as PP / SMS
and melt-blown polypropylene. As for finished products including
face mask / Atomizing sterilizer / thermometer / Sterilization
ultraviolet lamp / 75% alcohol disinfection swab pad / breathing
apparatus bipap and so on... Our customers from all over the world,
such as USA, Japan, Spain, South Korea and Saudi Arabia.
Guangzhou Lumileds lighting has been approved by CE certificate of
NB company, ISO 13485 of European Union, FDA certificate and KC
certificate. Guangzhou Lumileds lighting built new dust free
workshops in the begining of 2020, we are always improving
ourselves based on the market and customer needs. Now we have over
50000 square meter production base and over 300 employees. Our
non-woven fabric workshop imported the double spray-head from Japan
and several automated production lines for face mask production.
Guangzhou Lumileds company's annual output value over 10 million
RMB each months until Feb. And non-woven finished products are sent
out over thirty 40HQ containers every month.