Anti Dust Ffp1 Face Mask Non - Woven Fabric Customized Logo Elastic Loop

Anti Dust Ffp1 Face Mask Non - Woven Fabric Customized Logo Elastic Loop

Disposable Breathable Mask Dust-Proof Anti-Fog FFP3 FFP2 FFP1 PM2.5 N95 KN95 Virus Protect Adult Kid non-woven fabric Masks

Features:

1. Ideal for Dust, Germs, Smoke, Pollution, Ash, Pollen, Crafts, Gardening, Travel, Anonymity.

2. Elastic ear-loops with no pressure to the ears.

3. With exhalation valve, allowing smooth breathing, reducing heat and moisture accumulation.

4. Electrostatic filter material, effectively protect the mask of PM2.5.

5. Hypoallergenic, High filtration, capacity.

Specifications:

Close fit to prevent polluted air from entering.

Effective protection from solid & liquid aerosols.

Material: non-woven fabric/absorbent cotton

FFP3>FFP2=N95=KN95>KN90

Package Included:

1 * mask

3 . Mask CE Quality Standards

1 . Stardard : EN : 149 : 2001 + A1 : 2009
2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
4 . Test Medium : NACL & DOP

4 . Certification
This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

5 . Directions for use

• The mask is for single use only.
• The mask should not be removed from its packaging until its required for use.
• Use the respirator in accordance with applicable health and safety regulations.
• Fit the respirator and check leak-tightness before entering the contaminated area.
• Wear the respirator for the whole duration of exposure to contaminants.It should not be used for more than 8 hours continuously and should be discarded after use.
• Transport and stockage of unused masks should be such that the product is not stored in direct sunlight and in frost free conditions,not in contact with solvents and cannot be damaged by physical contact with hard surfaces/items.
• As required by European Health and Safety requirements,the user is advised that when the mask is in contact with the wearer’s skin,it may cause allergic reaction to susceptible individuals.If this is the case,leave the hazard area,remove the mask and seek doctor’s advice.

​

6 . Expiry date

If maintained as per storage instructions , products can be used up to 5 years from date of manufacture.

7 . Packing

Normal Packing 20pcs/box,400pcs/ctn

8 . Advantages

• Polypropylene (P.P.) outer layer provides smooth lining and avoids loose fibres.
• Embossed fringe seal avoids fluffy open layer around the edges. Latex-Free synthetic rubber headstrap.
• Contour design ensures the compatibility of glasses/goggles and reduces fogging.
• Soft nose foam and adjustable nosepiece ensure custom shape and increase the worker comfort and acceptance.
• Light wear and comfortable. Contour fit.Easy breathing/Speaking. Clear vision. Free maintenance (disposable item).
• Better breathing provided by the exhalation valve.
• The ISO 9001 / ISO 14001 certified production guarantees the reliability / regularity of the production and the control of the environmental impact.

JINWEI Industry Co., Ltd is a solid company with owned factory . we also registered in Hongkong as JINWEI Industry Co.ltd . our mainland Factory is established since 2009 and located in Dongguan with 2000 square meters, we follow a strict 6S quality control management Our factory and products have a Certification of approved ISO ,CE, FDA. Welcome to visit us at any time. we focus on make Masks. Our weekly capacity is 9,000,000 pieces disposable protectctive masks and Surgical masks, 7,200,000 pieces folding masks including KN95 /N95

Also we are direct agent for manufacturers of Infrared thermometer ,body suit/uniform, hood , glove for the use of personal health care, hospital, and other industries. our partner manufacturers have combined daily capacity of 50,000 pieces hood, 500,000 pairs glove. 50000pcs Infrared thermometer . All these nearby partner manufacturers are certified with CE and FDA for their products. our QC Engineers will further conduct inspection on their goods before shipment .

With our Supreme Quality and Service, now we have customers from all over the world such as North Amercia, Europe, Asia, Africa and Middle east etc., and these customers have kept long-term cooperation with us. We hope we can work with you in the near future.