

Add to Cart
2.5 Ton Pillar Mounted Jib Crane Max Height 10m Double Speed Polyurethane Buffer
Product presentation of Pillar Mounted Jib Crane
Why Choose Silence Jib Crane:
Jib crane arm reaches every corner of the workspace.
Easy slewing operation with pivot resistance regulator as standard
feature, positioning accuracy.
Compact design, perfectly suitable for feeding of machines and
machining centres or installation of machines.
Supports ergonomic operation while reducing strain on workers.
Large effective lifting height. Large operating range thanks to
generous swivel angle.
Column height and jib arm length can be adjusted to conditions on
the spot.
Broad range of fastening options provides for convenient
installation.
High-quality coating. High quality wear resistant components.
Modern design with affordable price.
Technical parameters of Pillar Mounted Jib Crane
Capacity(KG) | 500 KG | 1000 KG | 2000 KG | 3000 KG | 5000 KG |
Model | BZD0.5 | BZD01 | BZD02 | BZD03 | BZD05 |
Beam Material | H Beam & KBK Beam | ||||
Travelling Type | Electrical & Manual | Electrical | Electrical | Electrical | |
Revolving Type | Electrical & Manual | Electrical | Electrical | Electrical | |
Revolving radius | 1m - 7m | 1m - 7m | 1m - 7m | 1m - 7m | 1m - 7m |
Lifting Height | 2m - 10m | 2m - 10m | 2m - 10m | 2m - 10m | 2m - 10m |
Total Height | 2m - 10m | 2m - 10m | 2m - 10m | 2m - 10m | 2m - 10m |
Revolving Angle | 180° & 270°& 360° | ||||
Lifting Speeed | 7.2/2..4 | 6.9/2.3 | 6.6/2.2 | 6.6/2.2 | 2.7/0.9 |
Electric System of Pillar Mounted Jib Crane
01.Power supply through step less slide lines.
02.Lifting mechanisms and traveling mechanisms are mutually
independent and could travel at the same time.
03.Control panel protection degree is IP54.
04.Reasonable components installation, convenient for check and
maintenance.
05.Electric cable is suspended in cable saddle, stationary cable
trolley which slides on a galvanized C-type steel.
Production Technology of Pillar Mounted Jib Crane
box-type shaped by wielding.
High quality carbon steel Q235B and Q345B.
the girder connected by high strength screws.
Welding seams are tested by X-ray and ultrasound.
Compact structure, small volume and light weight trolley.
Lifting mechanism is open type winch trolley.
Compact reducer motor drive, step less control, hardened gears and
safety disc brake.
Good operation performance, step less speed regulating and running
smoothly.
Main girders Shot blasting sa2.5 after welding to release internal
stresses.
Painting high quality epoxy zinc-rich primer, and the thickness of
oil film is 140μm.
Free Standing Jib Crane Design
360° rotation.
The head assembly is constructed of standard plate, angles, and
channels to ensure minimum deflection and maximum rigidity.
Head assembly is designed to inhibit dislodgment due to upward and
forward motion, also allows bottom entry electrification inside the
head and will also allow mounting above the boom for top entry
electrification.
Allows for electrified, motor driven, powered rotation through
various collector ring assemblies.
The boom or I-beam is designed to meet all specifications utilizing
a 25% factor of rated load for impact and 15% of rated load for
hoist and trolley weight.
The pipe mast or column is designed to give maximum strength and
minimum deflection to resist bending, buckling, and crushing as
well as wear by the trunnion roller assembly.
The top bearing assembly utilizes a tapered roller bearing with a
grease fitting for proper lubrication.
Packaging