Strong Drilling Rig Drill Bits Dhd350 Cop54 Ql50 Sd5 Hm5 For Water Well
Brand Name:Sanrock
Certification:ISO9001
Minimum Order Quantity:1 Set/Sets
Place of Origin:Zhejiang, China
Supply Ability:5000 Set/Sets per Month
Packaging Details:wooden box or plastic box.
Contact Now
Add to Cart
Verified Supplier
Location:
Quzhou Zhejiang China
Address:
No.28, Wenyuan Road, Qujiang District, Quzhou City, Zhejiang Province,China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Strong Drilling Rig Drill Bits Dhd350 Cop54 Ql50 Sd5 Hm5 For Water Well
Bit face shape selection:
1. Drop Center Bit
For high penetration rates in soft to medium hard and fissured rock
formations. Low to medium air pressures. Maximum hole deviation
control.
2. Concave Face
The all-round application bit face specifically for medium hard and
homogenerous rock formations. Good hole deviation control and good
flushing capacity.
3. Convex Face
For high penetration rates in soft to medium-hard with low to
medium air pressures. It is the most resistance to steel wash, and
may reduce the load and wear on the gauge buttons, but poor hole
deviation control.
4. Double Gauge Face
This kind of face shape is suitable for fast penetration rates in
medium to hard rock formations. Designed for high air pressures and
good resistance to steel wash step gauge bit.
5. Flat Face Bit
This kind of face shape is suitable for hard to very hard and
abrasive rock formations in applications with high air pressures.
Good penetration rates an resistance to steel wash.
| DTH hammer type | SRHD55 | SRHD55C | SRHSD5 | SRHQL5 | |
| Length(less bit) mm | 1214 | 1160 | 1175 | 1156 | |
| Weight(less bit) kg | 76.5 | 72.5 | 72.5 | 73 | |
| External diameter mm | Φ125 | Φ125 | Φ125 | Φ125 | |
| Bit shank | COP54 DHD350R | HD55C DHD350Q | SD5 | QL50 | |
| Hole range(mm) | Φ135-155 | Φ135-155 | Φ135-155 | Φ135-155 | |
| Connection thread | API 2 3/8"Reg | API 2 3/8"Reg | API 3 1/2"Reg | API 3 1/2"Reg | |
| API 3 1/2"Reg | API 3 1/2"Reg | ||||
| Working pressure | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | 1.0-2.5Mpa | |
| Impact rate at 1.5-1.7Mpa | 25Hz | 25Hz | 25Hz | 25Hz | |
| Recommended Rotation speed | 20-35r/min | 20-35r/min | 20-35r/min | 20-35r/min | |
| Air consumption | 1.0Mpa | 9.0m3/min | 9.0m3/min | 9.0m3/min | 9.0m3/min |
| 1.8Mpa | 15.0m3/min | 15.0m3/min | 15.0m3/min | 15.0m3/min | |
| 2.4Mpa | 23.0m3/min | 23.0m3/min | 23.0m3/min | 23.0m3/min | |
PACKAGE
Strong Drilling Rig Drill Bits Dhd350 Cop54 Ql50 Sd5 Hm5 For Water Well
Inquiry Cart
0